For discussion of firmware updates, enhancement requests, and other upgrades to your Toppy, but not TAPs or computer-related

Moderators: Technical, Oz mods

Post Reply
Fort Jefferson
Posts: 16
Joined: Tue Feb 16, 2016 10:02 am

5810 Hard drive change.

Post by Fort Jefferson »

I'm putting a SATA hard drive in one of my 5810's The drive is a WD 500Gb out of a Humax PVR. I've used one of these adapters, I can hear the drive spinning up, but the PVR doesn't seem to be able to see it. Has anyone had any success? ... =sata+pata
Frequent contributor
Posts: 2693
Joined: Tue Oct 30, 2007 3:19 pm

Post by ccs »

I haven't found anyone confirming (or otherwise) that the adapter works.

These links are getting very old now.....

recommended drives
recommended adapters
TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14
Geoff Bacon
Frequent contributor
Posts: 4669
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol

Post by Geoff Bacon »

A bit late for you now but andyfras can (could?) supply a relatively cheap adapter and cable (well it worked on my toppy).

Does the data cable need to be drilled and/or swapped end for end? (first post in this thread)

TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
Post Reply