For discussion of how to use, install and choose TAPs - additional software packages that run on your Toppy

Moderator: Technical

Post Reply
rafal1
Posts: 10
Joined: Sat Mar 01, 2014 11:23 am

Looking for HDDInfo TAP

Post by rafal1 »

Hi
As in the subject. The TAPs download page is no longer working.
I wonder if someone can point me where I can download HDDInfo TAP
tia

rafal
ccs
Frequent contributor
Posts: 2689
Joined: Tue Oct 30, 2007 3:19 pm

Post by ccs »

You'll find it here, along with some other goodies (Signal Monitor, Channel Organiser)...

http://www.toppy.org.uk/~chunkywizard/T ... lities.zip
TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14
ccsx
rafal1
Posts: 10
Joined: Sat Mar 01, 2014 11:23 am

Post by rafal1 »

Thank you very much!!!
Geoff Bacon
Frequent contributor
Posts: 4663
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

If you just want to check the status of the disk, you could run my fsCheck tap. Note: You will still need the HddInfo tap if you want to change the settings that it can manage (unlikely).

You don't have a signature so not quite sure what you are running on the toppy.... the MyStuff installer loads several utility taps including fsCheck.

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
juwlz
MyStuff Team
Posts: 10804
Joined: Fri Aug 12, 2005 7:13 am
Location: Wokingham, Berkshire (Hannington transmitter)
Contact:

Post by juwlz »

... and if you have faults that look like hard drive problems, there's a good chance that it's actually the capacitors. See Toppy Repairs

Julie
5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CfCtFsIMPePsR3UUuUxZ
5810, TS On, F/W: F/W: MS6 Recommended F/W 12/9/2009 +BmCfCtFsR3Z
MyStuff info; Help!; Reference
Harmony 885 remote. Sig date 8 April 2012
Geoff Bacon
Frequent contributor
Posts: 4663
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

Forgot to say that, if you have a windows pc, you can use TopManager in conjunction with the PcControl tap to look at the disk (similar output to HDDInfo)

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
rafal1
Posts: 10
Joined: Sat Mar 01, 2014 11:23 am

Post by rafal1 »

I just want to check internal temperature of the disk. The old one failed and the replacement one is getting a bit hot 48 -49 C while recording ( temp measured on the surface). I already got capacitors kit from Andy and will fit it asap
Rafal
jimi
Frequent contributor
Posts: 312
Joined: Wed Mar 29, 2006 1:25 am
Location: The Sunny Kingdom
Contact:

Post by jimi »

I fitted a fan to each of my Toppies http://forum.toppy.org.uk/forum/viewtopic.php?t=17962& never had any temperature problems since then 8) Just realised that was in 2010 :shock:
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+Pe
TAPs: PcControl B1.4; Extend v1.7; EPG2MEI v0.96; SecCache (UK) v0.4; EIT Sub (Game) v0.6; Font Manager 1.0d; MHEG On/Off A3; (MyInfo B5.6); PruneEPG 1.0; MyStuff 6.6;
Sig generated by TopManager/PcControl on 16/12/20
Post Reply