For questions, answers and tips aimed at new users, or those thinking about buying a Toppy

Moderators: General, Technical

Post Reply
Tonid
Posts: 3
Joined: Sat Jun 01, 2013 11:49 am

Firmware was changed with a latest one

Post by Tonid »

After scanning for new channels my TF-5810PVRt is showing the 'Firmware was changed with a latest one' message and it does not respond to the Yes or No buttons.

I have tried to download Empty Settings as suggested in other posts but nothing happens. I open the TFDN-USB Firware Update Program and find the Empty Settings file, click download, and turn on my Toppy but it does not start the download, it just runs and I get the same message on my TV screen.

I know that the USB connection is working as I can run Antares and see the files on the PVR. I am running Windows 7. Any help would be greatly appreciated as, at the moment, I am stuck.
tonid
ccs
Frequent contributor
Posts: 2687
Joined: Tue Oct 30, 2007 3:19 pm

Post by ccs »

You can use Antares to download firmware onto a 5810.

Just doubleclick the .tfd file and follow the instructions.
TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14
ccsx
Tonid
Posts: 3
Joined: Sat Jun 01, 2013 11:49 am

Firmware was changed with a latest one

Post by Tonid »

Download the file through Antares as suggested and now all is well, thanks a million!
tonid
Tonid
Posts: 3
Joined: Sat Jun 01, 2013 11:49 am

Lost TV Services List

Post by Tonid »

Update - Everything is running fine now except when I go to edit my TV Services list (OK on my remote control) to delete unwanted programs the list is blank - any ideas?
tonid
ccs
Frequent contributor
Posts: 2687
Joined: Tue Oct 30, 2007 3:19 pm

Post by ccs »

You probably need a factory reset (only timers are lost) and rescan.
TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14
ccsx
Geoff Bacon
Frequent contributor
Posts: 4648
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

@Tonid

When you say "delete unwanted programs", do you mean unwanted channels?

If so, install TopManager (link in my signature)
1) Use Connection| Settings to create a USB connection (then Connection| Open)
2) Tools| Install files| PcControl - then reboot toppy
3) PcControl| Show menus then PcControl| Channel Management
4) Identify My Transmitter in top combo box; choose your transmitter
5) Perform scan
6) Right click in display and choose "select all pay, porn, shopping"...
7) Delete Channels and then Finalize

If you don't want to use TM, you will need to do a manual scan and then use ChannelOrganiser to delete unwanted channels (don't do it manually with the remote as you may end up deleting "wrong duplicates")

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
Post Reply