General discussion relating to Topfield products for the Australian market

Moderators: General, Technical, Oz mods

nwhitfield
Site Admin
Posts: 9589
Joined: Sun Mar 20, 2005 10:11 pm
Contact:

Welcome!

Post by nwhitfield »

Welcome to this new area, specially for those who wish to discuss Australian Topfield models, and issues related to them.

Nigel.
Support this site - make a donation to our running costs
gomezz
Frequent contributor
Posts: 4000
Joined: Fri Nov 18, 2005 6:45 pm
Location: Buckingham
Contact:

Post by gomezz »

:D !ecnrB 'euo eciN
TF5800, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CbCfCtDEgEmEvEzIMPePsVdZ
TAPs: Power Down 0.75; QuickJump 1.72; MyStuff 6.6; TAP Commander 1.34; MyInfo B5.4; EPG2MEI v0.96;
Extend v1.7; EIT Sub v0.6; mei2archive BETA 3.8l6; Font Manager 1.0d; (Power Restore V0.7.3b)
R2-D2
Frequent contributor
Posts: 12148
Joined: Mon Dec 18, 2006 11:15 am
Contact:

Post by R2-D2 »

Brnce?

G'day to our upside down friends! Bonzer.
baobab68
Posts: 3
Joined: Fri Sep 18, 2009 11:53 pm
Location: Sydney Australia

Post by baobab68 »

Thank you chaps, toodle-pip, eh, wot?
gomax
Posts: 1
Joined: Wed Sep 30, 2009 1:37 am

Post by gomax »

Glad you folk had room at the inn, been chilly down here..... :roll:
cazlar
Frequent contributor
Posts: 121
Joined: Sat Mar 26, 2005 10:25 pm
Location: Back in Sydney!

Post by cazlar »

¡dn sıɥʇ ƃuıʇʇǝs ɹoɟ sʞuɐɥʇ ¡ɹǝpun-uʍop ɯoɹɟ ollǝɥ
deangelj
Frequent contributor
Posts: 316
Joined: Tue Mar 29, 2005 10:33 pm
Location: Sydney, Australia

Post by deangelj »

Nice to be back here :)
jpp
Frequent contributor
Posts: 138
Joined: Sun Sep 20, 2009 2:35 am
Location: Sydney, Australia

Post by jpp »

Hi Nigel,

Any chance that you might be able to create sub topics? There's a groundswell request to have separate Topics for each of the models we have here. If we don't get our old 5000 series back up anywhere, could we then perhaps have say at least 3 Topics - 5000 series, 7x00 series and the new 2400 series?
Cheers,
Phil
timmydownawell
Posts: 23
Joined: Wed Sep 30, 2009 1:12 pm
Location: Sydney AU

Post by timmydownawell »

hi there, so glad you could have us!!

I'm formerly a kiwi but don't hold that against me. I extend a laurel, and hardy handshake!

And this...

http://www.youtube.com/watch?v=quHeUUDfdcc

Awfully sorry... it's from the 1980s. :D
nwhitfield
Site Admin
Posts: 9589
Joined: Sun Mar 20, 2005 10:11 pm
Contact:

Post by nwhitfield »

I'll see how it goes on adding extra areas - it tends to make the main forum index pretty lengthy, but will be a lot easier when (maybe next month, if time permits) we upgrade to phpBB 3.
Support this site - make a donation to our running costs
kermit
Frequent contributor
Posts: 972
Joined: Wed Jun 01, 2005 5:21 am
Location: Brisbane, Australia

Post by kermit »

jpp wrote:perhaps have say at least 3 Topics - 5000 series, 7x00 series and the new 2400 series?
Thanks for creating this section Nigel. I too vote for some sub sections within this new OZ Toppies section.
Cheers Simon
>8-]

TF5000PVRt 500GB March '09 f/w
kermit
Frequent contributor
Posts: 972
Joined: Wed Jun 01, 2005 5:21 am
Location: Brisbane, Australia

Post by kermit »

cazlar wrote:¡dn sıɥʇ ƃuıʇʇǝs ɹoɟ sʞuɐɥʇ ¡ɹǝpun-uʍop ɯoɹɟ ollǝɥ
Good one Nathan. :lol:
Cheers Simon
>8-]

TF5000PVRt 500GB March '09 f/w
garyvx
Posts: 22
Joined: Thu Sep 24, 2009 5:30 am
Location: Melbourne Australia

Post by garyvx »

Thanks Nigel
A home at last, my Toppies were feeling left out :( now they seem a LOT happier.
I'll also have a place to visit, it will keep me off the streets :lol:

Regards Gary
Vortical
Posts: 2
Joined: Thu Oct 01, 2009 2:12 pm
Location: Perth, Australia

Post by Vortical »

Thanks Nigel

It's also nice to see a few familiar usernames here already too :D
damo
Posts: 9
Joined: Thu Mar 02, 2006 9:55 pm
Location: Melbourne, Australia
Contact:

Post by damo »

I think there is a fair few of us who have been around here for a while, and good to see the others have usernames that are unique enough that we know who they are.

Good to have a place for us refugees to gather!
Post Reply