A space for discussions about AV gear and other topics of broad interest to Toppy users

Moderators: General, Technical

Post Reply
jimi
Frequent contributor
Posts: 312
Joined: Wed Mar 29, 2006 1:25 am
Location: The Sunny Kingdom
Contact:

Bush B500PVR

Post by jimi »

My brother in law asked me asked me to have a look at his mother in laws Bush B500PVR which was stuck on standby. Had a look at it and could see 3 very iffy (domed) capacitors and couldn't seem to find a 12v output from the PSU. replaced the 3 caps and it fired straight up with all recordings timers etc intact.
Caps were Sam Young, 2 x 1000uf 25V and 1 x 470uf 16V
replaced with 2 x Panasonic Low ESR 1000uf 25V and 1 x Panasonic Low ESR 470uf 25V
Seems very similar to this http://forum.toppy.org.uk/forum/viewtop ... ht=#271228 and the Toppy PSU capacitor problems
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+Pe
TAPs: PcControl B1.4; Extend v1.7; EPG2MEI v0.96; SecCache (UK) v0.4; EIT Sub (Game) v0.6; Font Manager 1.0d; MHEG On/Off A3; (MyInfo B5.6); PruneEPG 1.0; MyStuff 6.6;
Sig generated by TopManager/PcControl on 16/12/20
Post Reply