Read about the latest site updates, feedback and support

Moderator: General

Post Reply
rossco555
Posts: 15
Joined: Sat Sep 01, 2007 4:23 pm

MyStuff V6.6 available anywhere???

Post by rossco555 »

Hi there...My copy of MyStuff 6.6 has corrupted on my Toppy. Does anyone know where a copy of 6,6 could be downloaded please...many thanks Rossco555
Geoff Bacon
Frequent contributor
Posts: 4662
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

Use my BuildOfflineMyStuffInstaller


Are you sure the rest of the disk is ok? ; corruption of a single tap would be unusual.

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
rossco555
Posts: 15
Joined: Sat Sep 01, 2007 4:23 pm

MyStuff 6.6

Post by rossco555 »

The disk appears to be OK. Its actually just loaded OK, without an error message, and the EPG has populated as well. I will keep you posted when I recheck in the morning, after an EPG refresh. Thanks...Rossco555
Geoff Bacon
Frequent contributor
Posts: 4662
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

Suggest you run my fsCheck tap and post the results in the [usr=http://forum.toppy.org.uk/forum/viewtopic.php?t=20303]fsCheck Reports[/url] thread.


The tap should be in \ProgramFiles\Utilities

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
rossco555
Posts: 15
Joined: Sat Sep 01, 2007 4:23 pm

fsCheck 1.5

Post by rossco555 »

The results of the check as follows...


Code: Select all

File System Analysis
--------------------
Generated by  fsCheck 1.5  on  20/06/2018 19:24


VERDICT: The file system appears  GOOD

  Number of folders = 43
  Number of files   = 428
  DataFiles summary = 105 recordings  ( folders: 20, other: 2 )
  Capacity          = 233 GB  (107 GB free)

ISSUES
------
  Number of unusual practices      = 1

  /Settings
    >>> Warning: Not normally present in __ROOT__
        The root folder should normally only contain the three reserved folder names
        (DataFiles, MP3 and ProgramFiles).
        If not intentional, this may be due to a user transfer into the wrong target
        folder or by a corrupted file system.
        To Fix: Delete or move into the correct reserved folder.

  /DataFiles/__temprec__.ts
    >>> File currently being modified by Time Shifting (you can ignore this).

DISK GEOMETRY
-------------
  Total Sectors       = 488397168  (233 GB)
  Number of Clusters  = 129891
  Sectors Per Cluster = 3760
  Sectors used by FAT = 762

DISK USAGE
----------
  Number of folders   = 43
  Number of files     = 428
  Capacity            = 233 GB
  Free space in FAT   = 107 GB  (59576 clusters)
  Computed free space = 107 GB  (59576 clusters)

SMART DATA
----------
  HDDModel:  SAMSUNG SP2514N
  Firmware:  VF100-50
  HDDSerial: S08BJ1EP608179
  AAM:       Supported  (Mode 1/4: Off)
  APM:       Not supported
  Smart:     Disabled (To enable, use keypad 3 in HDDinfo tap)

PERFORMANCE STATISTICS
----------------------
  Dynamic Memory Avail= 10890 KB
  Amount Used         =   235 KB
  - for Analysis      =    84 KB
  - for Display       =   151 KB
  Time Taken          =  3900 ms

*** END OF REPORT ***
Geoff Bacon
Frequent contributor
Posts: 4662
Joined: Fri Jan 12, 2007 12:21 am
Location: Bristol
Contact:

Post by Geoff Bacon »

Hi

The output is missing the SMART Characteristics (this shows the hardware state of the disk)

Please run the HDDInfo tap and use keypad 3 to enable SMART.

Then rerun fsCheck and post new results (no need to reboot the toppy)

Geoff
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPePfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; MHEG On/Off A3; QuickJump 1.72; EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Font Manager 1.0d; Extend v1.7; WSSkiller V2.12d; MyInfo B5.6; fsSave 1.1; PruneEPG 1.0; MyStuff 6.6-1;
Sig generated by EMJB's MyInfo.tap on 3/5/21
rossco555
Posts: 15
Joined: Sat Sep 01, 2007 4:23 pm

Post by rossco555 »

I have run the various TAPS and tidied up the EPG, reducing the channels considerably. The latest fsCheck is included below...

There is a Settings folder (empty) in the root directory...can this be deleted OK without detriment@

The only issue I appear to have now is the BBC4 EPG is completely blank, and will hopefully re-populate with tonights scan?


Code: Select all

File System Analysis
--------------------
Generated by  fsCheck 1.5  on  21/06/2018 07:46


VERDICT: The file system appears  GOOD

  Number of folders = 44
  Number of files   = 439
  DataFiles summary = 106 recordings  ( folders: 21, other: 2 )
  Capacity          = 233 GB  (106 GB free)

ISSUES
------
  Number of unusual practices      = 1

  /Settings
    >>> Warning: Not normally present in __ROOT__
        The root folder should normally only contain the three reserved folder names
        (DataFiles, MP3 and ProgramFiles).
        If not intentional, this may be due to a user transfer into the wrong target
        folder or by a corrupted file system.
        To Fix: Delete or move into the correct reserved folder.

  /DataFiles/__temprec__.ts
    >>> File currently being modified by Time Shifting (you can ignore this).

DISK GEOMETRY
-------------
  Total Sectors       = 488397168  (233 GB)
  Number of Clusters  = 129891
  Sectors Per Cluster = 3760
  Sectors used by FAT = 762

DISK USAGE
----------
  Number of folders   = 44
  Number of files     = 439
  Capacity            = 233 GB
  Free space in FAT   = 106 GB  (59342 clusters)
  Computed free space = 106 GB  (59342 clusters)

SMART DATA
----------
  HDDModel:  SAMSUNG SP2514N
  Firmware:  VF100-50
  HDDSerial: S08BJ1EP608179
  AAM:       Supported  (Mode 1/4: Off)
  APM:       Not supported
  Smart:     Enabled, AutoSave On, Tests passed

  Attr  Description                Value Worst  Thr        Raw  Flags
  0x01  Raw Read Error Rate          100   100   51          0  0x0f wpr_o_
  0x03  Spin Up Time                 253   253   25       4544  0x07 wp__o_
  0x04  Start/Stop Count              76    76   ..      24625  0x32 ___cos
  0x05  Reallocated Sector Count     253   253   10          0  0x33 w__cos
  0x07  Seek Error Rate              253   253   51          0  0x0f wpr_o_
  0x08  Seek Time Performance        253   253   15          0  0x25 wp___s
  0x09  Power On Hours Count         100   100   ..      13747  0x32 ___cos
  0x0a  Spin Retry Count             253   253   51          0  0x33 w__cos
  0x0b  Calibration Retry Count      253   253   ..          0  0x12 ___co_
  0x0c  Power Cycle Count             89    89   ..      11961  0x32 ___cos
  0xbb  Reported Uncorrectable Errs  253   253   ..          0  0x32 ___cos
  0xbe  Airflow Temperature          160   160   ..         26  0x22 ____os
  0xc2  Device Temperature           160   160   ..         26  0x22 ____os
  0xc3  Hardware ECC Recovered       100   100   ..    1431833  0x1a __rco_
  0xc4  Reallocated Event Count      253   253   ..          0  0x32 ___cos
  0xc5  Current Pending Sector       253   253   ..          0  0x12 ___co_
  0xc6  Uncorrectable Sector Count   253   253   ..          0  0x30 ___c_s
  0xc7  UDMA CRC Error Count         200   200   ..          0  0x3e _prcos
  0xc8  Write Error Rate             100   100   ..          0  0x0a __r_o_
  0xc9  Off Track Errors             253   253   ..          0  0x0a __r_o_

An interpretation of the SMART data:
------------------------------------
        Acronis Health Indicator = 100 %

PERFORMANCE STATISTICS
----------------------
  Dynamic Memory Avail= 10453 KB
  Amount Used         =   235 KB
  - for Analysis      =    84 KB
  - for Display       =   151 KB
  Time Taken          =  4020 ms

*** END OF REPORT ***
Post Reply