Click here to go to the forum index Click here for the home page
 
Author Message

<  General Toppy discussions  ~  10 Day EPG is causing problems with MyStuff

Page 1 of 1
pixieplod3
Posted: Thu Nov 05, 2015 1:40 pm Reply with quote
Joined: 27 Oct 2008 Posts: 7
My Sutton Coldfield transmitter appears to be sending 10 days of EPG data. The default EPG shows just 8 days of data, but MyStuff 6.6 shows 10 days of data and has screen corruption on its Single channel display for the 10th day. Is this just screen corruption ( by Mystuff ) or could the other taps in the EPG data chain be causing my problem ( by buffer overflow etc ).
The taps I am running are :-
PcControl B1.4
EPG2MEI v0.96
SecCashe (UK) v0.4
PruneEPG 1.0
EIT Sub (Game) v0.6
Tap Commander 1.34
MHEG On/Off A3
Font Manager 1.0d
Mystuff 6.6

Has anyone else seen this problem ?

_________________
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 +BmCbCfCtDEvEzFsIPePsRtScWfZ
TAPs: PcControl B1.4; EPG2MEI v0.96; SecCache (UK) v0.4; PruneEPG 1.0; EIT Sub (Game) v0.6; TAP Commander 1.34; MHEG On/Off A3; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.6;
Sig generated by MyInfo on 17/2/16
?
View user's profile Send private message
mstombs
Posted: Thu Nov 05, 2015 3:56 pm Reply with quote
Frequent contributor Joined: 31 Dec 2006 Posts: 938
MyStuff works with up to 14 days data when fed with external RT data - are you also using RT2MEI or AS2MEI?
View user's profile Send private message TF5800
meadfoot
Posted: Thu Nov 05, 2015 4:11 pm Reply with quote
Frequent contributor Joined: 19 Jul 2005 Posts: 261
I am also on Sutton Coldfield but can only "see" up to next Thursday so 8 days on both my Toppies and on all three of our TVs.

_________________
Sutton Coldfield TX
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -SyXl+WfZ
TAPs: PcControl B1.4; EPG2MEI v0.96; MyStuff 6.6; Extend v1.7; SecCache (UK) v0.4; EIT Sub (Game) v0.6; Bookmark 3.0; MyInfo B5.6; TF5000 Display v1.53; UK Subtitle 1.9; Font Manager 1.0d;
Sig generated by MyInfo on 2/7/13


'I hear and I forget. I see and I remember. I do and I understand' Confucius
View user's profile Send private message Visit poster's website
pixieplod3
Posted: Thu Nov 05, 2015 6:02 pm Reply with quote
Joined: 27 Oct 2008 Posts: 7
meadfoot wrote:
I am also on Sutton Coldfield but can only "see" up to next Thursday so 8 days on both my Toppies and on all three of our TVs.


Hi meadfoot

If you can "pm" me an email address , I can sent you a screen capture of an EPG page showing Sun 15 Nov which has the last entry . The entry for Sun 6am has a title of "This EPG data is the copyright of the Press Association"

Maybe they are just experimenting and the data they have used contains control characters which is causing MyStuff problems as it tries to display the program description using two lines instead of just one. This then overlaps the next line.

My EPG data is only from Sutton Coldfield which was captured over night.

_________________
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 +BmCbCfCtDEvEzFsIPePsRtScWfZ
TAPs: PcControl B1.4; EPG2MEI v0.96; SecCache (UK) v0.4; PruneEPG 1.0; EIT Sub (Game) v0.6; TAP Commander 1.34; MHEG On/Off A3; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.6;
Sig generated by MyInfo on 17/2/16
?
View user's profile Send private message
EMJB
Posted: Thu Nov 05, 2015 7:19 pm Reply with quote
Frequent contributor Joined: 08 Jul 2005 Posts: 3645 Location: Maldon Essex
pixieplod3 wrote:
. The entry for Sun 6am has a title of "This EPG data is the copyright of the Press Association".
That indicates that the data has come from as2mei - either you are running it or you got an initial "injection" of that data a few days ago when you installed MyStuff using the installer.

EMJB

_________________
Silver 5800, Board Rev 1.2, MS recomm F/W, Sudbury Tx, varying TAP config
View user's profile Send private message
juwlz
Posted: Thu Nov 05, 2015 7:47 pm Reply with quote
MyStuff Team Joined: 12 Aug 2005 Posts: 10804 Location: Wokingham, Berkshire (Hannington transmitter)
EMJB wrote:
... you got an initial "injection" of that data a few days ago when you installed MyStuff using the installer.
Good spot - I'd forgotten about that.

Give it a week, and it will go away Smile

_________________
5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CfCtFsIMPePsR3UUuUxZ
5810, TS On, F/W: F/W: MS6 Recommended F/W 12/9/2009 +BmCfCtFsR3Z
MyStuff info; Help!; Reference
Harmony 885 remote. Sig date 8 April 2012
View user's profile Send private message Visit poster's website
pixieplod3
Posted: Thu Nov 05, 2015 10:39 pm Reply with quote
Joined: 27 Oct 2008 Posts: 7
EMJB wrote:
pixieplod3 wrote:
. The entry for Sun 6am has a title of "This EPG data is the copyright of the Press Association".
That indicates that the data has come from as2mei - either you are running it or you got an initial "injection" of that data a few days ago when you installed MyStuff using the installer.

EMJB


Very Happy Thanks EMJB - Yes I did a reinstall a few days ago.

I have got MyStuff to delete all my EPG data and my toppy has now re-populated my EPG and ALL IS WELL

Thanks all you Toppy People - from a happy pixie

_________________
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 +BmCbCfCtDEvEzFsIPePsRtScWfZ
TAPs: PcControl B1.4; EPG2MEI v0.96; SecCache (UK) v0.4; PruneEPG 1.0; EIT Sub (Game) v0.6; TAP Commander 1.34; MHEG On/Off A3; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.6;
Sig generated by MyInfo on 17/2/16
?
View user's profile Send private message

Display posts from previous:  

All times are GMT + 1 Hour
Page 1 of 1

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum