Click here to go to the forum index Click here for the home page
 
Author Message

<  MyStuff  ~  Turning off TAPS ?

Page 1 of 1
SDH
Posted: Fri Apr 20, 2012 9:58 am Reply with quote
Regular contributor Joined: 31 Mar 2008 Posts: 52 Location: High Wycombe,Bucks
Hi
I have today tried to install My Stuff 6.4 with new firmware onto my 5810 but when it comes to the re-boot / install it is telling me 'inadequate memory for uncompressed file' please turn off taps & try again.
Unfortunately i seem to be having trouble turning off the taps.

Any help would be great
Thanks
View user's profile Send private message
Geoff Bacon
Posted: Fri Apr 20, 2012 10:27 am Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4532
Suspect you need to turn of the toppy and boot "tapless" i.e. hold 0 down on the remote until the TV shows a picture.

Then
1) Press Archive
2) Press << (to show ProgramFiles)
3) Press OK (with Auto Start selected)
4) Scroll down to FwLoad and press OK

Assuming all that works, you probably need to reboot the toppy.
If no FwLoad, then the easiest thing is probably to reinstall MyStuff again (you should have more memory because you booted tapless)

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
andyfras
Posted: Fri Apr 20, 2012 11:01 am Reply with quote
Frequent contributor Joined: 25 Jul 2005 Posts: 3470
You should ensure that there are no duplicate channels before attempting to install MyStuff. It's strongly recommended to delete all the dross (pay, porn, shopping etc.) channels too.

_________________
Toppy PSU repair service or capacitor kits for DIY available - PM me for details.
MyStuff 6.6 : Little Clock : MHEGOnOff : Extend : EPG2MEI : SecCache : EIT_Sub : TSSaver : Prune EPG
Channel Organiser : Tap Commander : HDD Info : PCControl : Signal Monitor : MyInfo
URC-7555 remote: TF5800 320GB 2.5", Recommended_5800.tfd + CfPePsScUUuWfZ
View user's profile Send private message Visit poster's website
juwlz
Posted: Fri Apr 20, 2012 2:31 pm Reply with quote
MyStuff Team Joined: 12 Aug 2005 Posts: 10804 Location: Wokingham, Berkshire (Hannington transmitter)
The easiest way to prune your channels is to use Channel Organiser, which the installer will have added to /ProgramFiles/Utilities.

Aim to get to a total of no more than 40 channels (easy when you delete all the pay, porn, shopping and unwanted radio)

So the full process is
Boot TAPless by holding down the zero button as the Toppy starts
Run Channel Organiser to delete channels
Run FWLoad to complete the firmware update
Reboot again to start everything normally

Julie

_________________
5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CfCtFsIMPePsR3UUuUxZ
5810, TS On, F/W: F/W: MS6 Recommended F/W 12/9/2009 +BmCfCtFsR3Z
MyStuff info; Help!; Reference
Harmony 885 remote. Sig date 8 April 2012
View user's profile Send private message Visit poster's website
SDH
Posted: Sat Apr 21, 2012 2:49 pm Reply with quote
Regular contributor Joined: 31 Mar 2008 Posts: 52 Location: High Wycombe,Bucks
Thanks for the replies.


Last edited by SDH on Sat Apr 21, 2012 2:53 pm; edited 1 time in total
View user's profile Send private message
juwlz
Posted: Sat Apr 21, 2012 2:51 pm Reply with quote
MyStuff Team Joined: 12 Aug 2005 Posts: 10804 Location: Wokingham, Berkshire (Hannington transmitter)
Channel Organiser should NEVER be put in Auto Start.

All you're doing when you boot TAPless is to stop TAPs in Auto Start from being loaded.

To run any TAP manually, get to the native archive (with no TAPs running, just press the Archive key), then << to get to ProgramFiles, then navigate to the folder where your TAP is saved, select it and press OK.

Julie

_________________
5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CfCtFsIMPePsR3UUuUxZ
5810, TS On, F/W: F/W: MS6 Recommended F/W 12/9/2009 +BmCfCtFsR3Z
MyStuff info; Help!; Reference
Harmony 885 remote. Sig date 8 April 2012
View user's profile Send private message Visit poster's website
SDH
Posted: Sat Apr 21, 2012 2:54 pm Reply with quote
Regular contributor Joined: 31 Mar 2008 Posts: 52 Location: High Wycombe,Bucks
Thats great, thanks
View user's profile Send private message

Display posts from previous:  

All times are GMT + 1 Hour
Page 1 of 1

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum