Click here to go to the forum index Click here for the home page
 
Author Message

<  General Toppy discussions  ~  What's happened to my EPG?

Page 1 of 3
Goto page 1, 2, 3  Next
macmac
Posted: Wed Jul 24, 2019 1:11 pm Reply with quote
Frequent contributor Joined: 24 Apr 2012 Posts: 117
Issue with my 5800:

Last-night I set my toppy to record 3 programs this morning.

This morning when I rebooted:

1: A popup window said: No EPG data available please check options.

2: The first program had recorded OK.
And the next 2 are still listed in the list of timed recordings, as they are not due until later today.

3: Then I tried to set more timed recordings, but the old/original EPG displayed instead of the later EPG.

So what is causing this and how do I resolve it?

Many thanks.

_________________
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; PcControl B1.3; SecCache (UK) v0.4;
Sig generated by MyInfo on 28/11/14 ++ 1TB HDD Upgrade
?
View user's profile Send private message
Geoff Bacon
Posted: Wed Jul 24, 2019 3:15 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
No EPG typically means that collection of the EPG last succeeded 8 days ago (Freeview only provides data for the next 7/8 days). Leaving it for a "while" is unlikely to fix the problem.

EPG collection is performed by the EPG2MEI tap so the first think to do is to check that it is in the Auto Start folder. You can do this with Antares or with TopManager. Assuming TM
1) Run TM
2) Connection| Open (if necessary)
3) Connection| Browse
4) Click on Auto Start (either pane)
Check that it shows EPG2MEI.tap, PcControl.tap and MyStuff.tap (there should also be others)

You could also try the following
5) PcConnect| Open
6) PcConnect| Tap Commander (or whatever I called it, probaly second option down)
This should show your running taps. Please post the names of the running taps (no need for sort numbers or anything else).
Note: 5 and 6 will only work if the PcControl tap is running (it should be but might not!)

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
Geoff Bacon
Posted: Wed Jul 24, 2019 3:47 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
Just had another thought - you could just post the MyInfo Log file (so long since anyone has a problem, I'd forgotten that this looks in both memory and in the Auto Files folder).

To do this, Use TM| Display MyInfo Log and copy and paste the output into this thread.

Please check that the bottom of the log shows that it ran today (i.e. it reflects your current configuration)

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
macmac
Posted: Wed Jul 24, 2019 7:08 pm Reply with quote
Frequent contributor Joined: 24 Apr 2012 Posts: 117
Geoff Bacon wrote:
Just had another thought - you could just post the MyInfo Log file (so long since anyone has a problem, I'd forgotten that this looks in both memory and in the Auto Files folder).

To do this, Use TM| Display MyInfo Log and copy and paste the output into this thread.

Please check that the bottom of the log shows that it ran today (i.e. it reflects your current configuration)

Geoff


Thanks for the info.
I've recently updated to W10 OS
I've just installed Toppy, but it wont connect to the toppy, it says...

Quote:
Connecting to Toppy1...
No Toppy connections detected - will try each dll in turn
Attempting to open USB connection using XP.dll ...
Attempting to open USB connection using Vista.dll ...
Attempting to open USB connection using tfWinUSB.dll ...
Failed to establish connection to Toppy using any of the USB drivers
<<< Connection failed
TopManager has not detected any programs that would prevent use e.g. Altair
<<< Check Toppy is switched on and cable is connected


I've tried setting to run in compatibility-mode with W7, but still get the same message.

_________________
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; PcControl B1.3; SecCache (UK) v0.4;
Sig generated by MyInfo on 28/11/14 ++ 1TB HDD Upgrade
?
View user's profile Send private message
Geoff Bacon
Posted: Wed Jul 24, 2019 9:46 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
The key is "I've recently updated to W10 OS"

With w10, you can't just connect the toppy and go, you have to load a special driver (basically z4t from the Antares website).
Furthermore, you have to jump through hoops to get W10 to load "unsigned" drivers (there should be other posts on the site about how to do this).

Your easiest solution at the moment, is to revert to your old pc to use TopManager (this assumes you still have the old pc). If not, then carry out the instructions in my first post.

Long term, you obviously need to get the W10 driver sorted

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
macmac
Posted: Thu Jul 25, 2019 2:08 pm Reply with quote
Frequent contributor Joined: 24 Apr 2012 Posts: 117
Geoff Bacon wrote:
...Your easiest solution at the moment, is to revert to your old pc to use TopManager (this assumes you still have the old pc). If not, then carry out the instructions in my first post.
Geoff


OK:
So I do still have W7 on the same PC as W10 (eg: dual boot)

So I installed TopManager,
But when I connected the USB cable Windows said it couldn't find the driver,
at: http://www.topfield.co.kr

This is primarily because I cant connect the W7 OS to the net.
So I went back to my W10, and loaded that url: http://www.topfield.co.kr
but I cant read it as it's all in Korean, and setting it to English does nothing.

I also went to: http://www.geeceebee.co.uk/downloads
but couldn't see the right info.

So do you have a link where I can download the required drivers?

Many thanks.

_________________
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; PcControl B1.3; SecCache (UK) v0.4;
Sig generated by MyInfo on 28/11/14 ++ 1TB HDD Upgrade
?
View user's profile Send private message
albertd
Posted: Thu Jul 25, 2019 2:26 pm Reply with quote
Frequent contributor Joined: 01 Jul 2010 Posts: 569
Maybe http://haselgrove.id.au/antares/z4t.html is what you need so that you can load z4t.

_________________
Now toppyless due to problems with my beloved TF5800. 2/4/2018
View user's profile Send private message
Geoff Bacon
Posted: Thu Jul 25, 2019 2:29 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
The instructions for Win7 are here http://haselgrove.id.au/antares/z4t.html

The same instruction also apply to W10 but only after you have disabled it's security to allow the "unsigned" driver to be loaded. i.e. don't bother with W10 at this point, just fix the problem using the W7 system

BTW, your signature says that you have PcControl installed i.e. you must have used TM in the past (perhaps thatn was an XP or Vista system)

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
Geoff Bacon
Posted: Thu Jul 25, 2019 3:45 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
I've added a page to my GeeCeeBee website on how to install the driver (this is based on my notes when I did it, there may be somethings I omitted to write down!)

Install Toppy Driver

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
ccs
Posted: Thu Jul 25, 2019 4:46 pm Reply with quote
Frequent contributor Joined: 30 Oct 2007 Posts: 2578
A quick way to get to "troubleshoot" is to restart when pressing the shift key.

_________________
TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14
ccsx
View user's profile Send private message
macmac
Posted: Thu Jul 25, 2019 7:04 pm Reply with quote
Frequent contributor Joined: 24 Apr 2012 Posts: 117
Geoff Bacon wrote:
The instructions for Win7 are here http://haselgrove.id.au/antares/z4t.html
BTW, your signature says that you have PcControl installed i.e. you must have used TM in the past (perhaps thatn was an XP or Vista system)
Geoff

NB: Thanks everyone for your input so far.

Geoff: I've used TM in W7 before, but the W7 I needed to use this time was a newer install that I hadn't used TM in before.

OK: I've now got TM to work in this W7, here is the contents of the log:

Quote:
MyInfo B5.6 Logging settings etc on: 25/7/2019 at 14:30

Waiting for other TAPs to load and settle

Ini file found
Starting to record data 97 seconds from boot

System ID: 456
TV Output: Type = Auto, Video = RGB, RF Channel = 36
Reported firmware version: TF-NPT 5.13.65T dated Oct 10 2009
Base firmware version: 5.13.65

Running TAPS:
Slot 0: PcControl B1.3 : Toppy control from PC
Slot 1: EIT Sub (Game) v0.6 : Provides faster, simpler and more robust EIT data collection, except when playing games
Slot 2: EPG2MEI v0.96 : Dumps the EPG data to disk as EPG.mei, with changes since last time in EPG_diff.mei
Slot 3: Extend v1.7 : Uses the Accurate Recording info to extend recordings (safely)
Slot 4: Font Manager 1.0d : Manage TAP Fonts
Slot 5: MyInfo B5.6 : Displays & records Toppy basic info
Slot 6: MyStuff 6.4 : UI Replacement
Slot 7: SecCache (UK) v0.4 : Optimal (UK) section caching to reduce the load on the Toppy
Slots 8 - 15 not used


Installed patch list:- Ab Bf Bq Ce Ck Cp Cw Cy De Ec Ee Ef Ep Er Es F Fm Gm H He Kt Mh Nf Ot P Pc R Ra Re Rh Rp Rs S Sd Sl Sr St T2 Td Te Tf Tp Ts Vr Xp Xw Xl
Firmware MS6 Recommended F/W 12/9/2009 modified thus: -Sy
Patch Decode Links - Will explain your patches:
MS6 Recommended F/W 12/9/2009 :- http://www.toppy.org.uk/~simonc/dp.html?p=AbBfBqCeCkCpCwCyDeEcEeEfEpErEsFFmGmHHeKtMhNfOtPPcRRaReRhRpRsSSdSlSrStT2TdTeTfTpTsVrXpXwXl
Missing patches:- http://www.toppy.org.uk/~simonc/dp.html?p=Sy

Time Mode set to Auto
Time Offset set to Auto

Found 110 TV channels and 32 Radio channels
No channel problems detected
LCNs of programme channels found on Tx Ch 36 are: 7, 40, 50, 60, 207, 208,
LCNs of programme channels found on Tx Ch 39 are: 18, 19, 22, 25, 31, 35, 36, 39, 42, 47, 62, 71, 73, 79, 81, 206, 234, 672, 674, 698, 699, 711, 712, 713, 714, 715, 716, 717, 718, 725,
LCNs of programme channels found on Tx Ch 42 are: 16, 20, 21, 26, 27, 30, 34, 37, 44, 54, 55, 58, 59, 63, 66, 70, 76, 77, 80, 85, 87, 203, 211, 251, 252, 253, 261, 263, 264, 265, 266, 268, 269, 270, 670, 671, 675, 679, 680, 695, 696, 795, 724, 727, 728, 735,
LCNs of programme channels found on Tx Ch 43 are: 28, 735,
LCNs of programme channels found on Tx Ch 45 are: 11, 12, 17, 23, 29, 32, 38, 41, 43, 46, 48, 49, 61, 65, 72, 233, 673, 678, 697, 723, 730, 731, 732,
LCNs of programme channels found on Tx Ch 46 are: 3, 4, 5, 6, 10, 13, 14, 15, 24, 28, 33, 45, 100,

Interactive On
Timeshift On

Memory - Free: 13 MB, Available: 12 MB
Disk - Total: 932 GB, Free: 13 GB

816 recordings (756 GB) + 0 deleted (0 GB) in 37 folders (+ 12 empty folders)

Time since boot: 0:0:1 (d:h:m)

Suggested signature for Toppy forum - copy following lines to signature block at http://forum.toppy.org.uk/forum/profile.php?mode=editprofile
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: PcControl B1.3; EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; SecCache (UK) v0.4;
Sig generated by MyInfo on 25/7/19


_________________
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; PcControl B1.3; SecCache (UK) v0.4;
Sig generated by MyInfo on 28/11/14 ++ 1TB HDD Upgrade
?
View user's profile Send private message
Geoff Bacon
Posted: Thu Jul 25, 2019 7:30 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
Thanks for the log file.

It shows several issues
1) you are running MS 6.4 - the latest version is 6.6 and has been available for a few years
2) PCControl (if you use it) shoud be 1.4
3) You have lots of unwanted porn channels (I haven't checked for other unwanted channels)
4) you don't have my PruneEPG tap (needed to prevent entries being discarded from the EPG)


I suggest you use my GCBMyStuffInstaller program and option 1 - this will update all the taps on your system.

Re PcControl, use TM Tools| Install Files| PcControl

You are running EPG2MEI so it should be generating the EPG - perhaps your aerial is not working (display the native EPG and check it contains data - if it does the aerial is working)

Re the channels, you will need to retune (use GCBMyStuffInstaller first and then do
1) Pres > (between << and >>)
2) Press Archive
3) Press << (to show ProgramFiles)
4) Scroll down to Utilities. OK
5) Scroll down to ChannelOrganiser.tap, OK
6) Scroll the transmitters and select your transmitter (according to the date)
7) Perform a scan
8 ) select to auto delete Shopping, Porn, and any other category that you don't want.
9) review channels before deletion and delete any others you don't want
10) Delete channels and do any other necessary actions
11) Reboot the toppy and wait 2 minutes

Please post the resulting MyInfo Log.

Wait 20 odd minutes and check the EPG to see if it is now updating

Geoff
Post

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
Geoff Bacon
Posted: Thu Jul 25, 2019 7:40 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
Checking your MyInfo log again, I see that you don't have any channels on PSB1 (BBC1, BBC2 etc).

I'm guessing you retuned the toppy using the wrong transmitter info (GCBMyStuffInstaller will provide the updated ChannelOrganiser tap and the correct data tables- it will be down to you to select the correct transmitter)

There may be other issues I haven't spotted in MyInfo Log - but do the previous instructions first and we'll take it from there

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website
macmac
Posted: Fri Jul 26, 2019 2:31 pm Reply with quote
Frequent contributor Joined: 24 Apr 2012 Posts: 117
Geoff Bacon wrote:
Thanks for the log file.

It shows several issues
1) you are running MS 6.4 - the latest version is 6.6 and has been available for a few years
2) PCControl (if you use it) shoud be 1.4
3) You have lots of unwanted porn channels (I haven't checked for other unwanted channels)
4) you don't have my PruneEPG tap (needed to prevent entries being discarded from the EPG)

I suggest you use my GCBMyStuffInstaller program and option 1 - this will update all the taps on your system.

Re PcControl, use TM Tools| Install Files| PcControl

You are running EPG2MEI so it should be generating the EPG - perhaps your aerial is not working (display the native EPG and check it contains data - if it does the aerial is working)

Please post the resulting MyInfo Log.

Wait 20 odd minutes and check the EPG to see if it is now updating

Geoff
Post


OK: So as you suggested I have:

1: Used GCBMyStuffInstaller program and option 1 - to update all the taps.

2: But I used TM to scan for channels & remove the unwanted ones.

3: Then I tried to use TM to...
Re PcControl, use TM Tools| Install Files| PcControl

...but I got this error message:
Quote:
Establishing communication with PcControl tap; Please wait ...
Communication established with PcControl B1.3

Fetching PcControl.zip ...
<<< Error collecting http://www.GeeCeeBee.co.uk/pccontrol/PcControl.zip
Installation not completed (no files copied to Toppy)


I guess this is because I'm not connected to the net, as I'm running TM via my W7 OS?

NB: My toppy will display the channels in the old/original EPG so I can record programs via that.
But there's still no new EPG.

Here's my current log:
Quote:
MyInfo B5.6 Logging settings etc on: 26/7/2019 at 12:52

Waiting for other TAPs to load and settle

Ini file found
Starting to record data 108 seconds from boot

System ID: 456
TV Output: Type = Auto, Video = RGB, RF Channel = 36
Reported firmware version: TF-NPT 5.13.65T dated Oct 10 2009
Base firmware version: 5.13.65

Running TAPS:
Slot 0: PcControl B1.3 : Toppy control from PC
Slot 1: EIT Sub (Game) v0.6 : Provides faster, simpler and more robust EIT data collection, except when playing games
Slot 2: EPG2MEI v0.96 : Dumps the EPG data to disk as EPG.mei, with changes since last time in EPG_diff.mei
Slot 3: Extend v1.7 : Uses the Accurate Recording info to extend recordings (safely)
Slot 4: Font Manager 1.0d : Manage TAP Fonts
Slot 5: MyInfo B5.6 : Displays & records Toppy basic info
Slot 6: MyStuff 6.6 : UI Replacement
Slot 7: SecCache (UK) v0.4 : Optimal (UK) section caching to reduce the load on the Toppy
Slot 8: MHEG On/Off A3 : MHEG control
Slot 9: PruneEPG 1.0 : Program to remove unnecessary entries from the EIT table
Slots 10 - 15 not used


Installed patch list:- Ab Bf Bq Ce Ck Cp Cw Cy De Ec Ee Ef Ep Er Es F Fm Gm H He Kt Mh Nf Ot P Pc R Ra Re Rh Rp Rs S Sd Sl Sr St T2 Td Te Tf Tp Ts Vr Xp Xw Xl
Firmware MS6 Recommended F/W 12/9/2009 modified thus: -Sy
Patch Decode Links - Will explain your patches:
MS6 Recommended F/W 12/9/2009 :- http://www.toppy.org.uk/~simonc/dp.html?p=AbBfBqCeCkCpCwCyDeEcEeEfEpErEsFFmGmHHeKtMhNfOtPPcRRaReRhRpRsSSdSlSrStT2TdTeTfTpTsVrXpXwXl
Missing patches:- http://www.toppy.org.uk/~simonc/dp.html?p=Sy

Time Mode set to Auto
Time Offset set to Auto

Found 110 TV channels and 32 Radio channels
No channel problems detected
LCNs of programme channels found on Tx Ch 36 are: 7, 40, 50, 60, 207, 208,
LCNs of programme channels found on Tx Ch 39 are: 18, 19, 22, 25, 31, 35, 36, 39, 42, 47, 62, 71, 73, 79, 81, 206, 234, 672, 674, 698, 699, 711, 712, 713, 714, 715, 716, 717, 718, 725,
LCNs of programme channels found on Tx Ch 42 are: 16, 20, 21, 26, 27, 30, 34, 37, 44, 54, 55, 58, 59, 63, 66, 70, 76, 77, 80, 85, 87, 203, 211, 251, 252, 253, 261, 263, 264, 265, 266, 268, 269, 270, 670, 671, 675, 679, 680, 695, 696, 795, 724, 727, 728, 735,
LCNs of programme channels found on Tx Ch 43 are: 28, 735,
LCNs of programme channels found on Tx Ch 45 are: 11, 12, 17, 23, 29, 32, 38, 41, 43, 46, 48, 49, 61, 65, 72, 233, 673, 678, 697, 723, 730, 731, 732,
LCNs of programme channels found on Tx Ch 46 are: 3, 4, 5, 6, 10, 13, 14, 15, 24, 28, 33, 45, 100,

Interactive Off
Timeshift On

Memory - Free: 15 MB, Available: 14 MB
Disk - Total: 932 GB, Free: 14 GB

811 recordings (754 GB) + 0 deleted (0 GB) in 36 folders (+ 13 empty folders)

Time since boot: 0:0:2 (d:h:m)

Suggested signature for Toppy forum - copy following lines to signature block at http://forum.toppy.org.uk/forum/profile.php?mode=editprofile
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: PcControl B1.3; EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.6; SecCache (UK) v0.4; MHEG On/Off A3; PruneEPG 1.0;
Sig generated by MyInfo on 26/7/19

_________________
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: EIT Sub (Game) v0.6; EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MyStuff 6.4; PcControl B1.3; SecCache (UK) v0.4;
Sig generated by MyInfo on 28/11/14 ++ 1TB HDD Upgrade
?
View user's profile Send private message
Geoff Bacon
Posted: Fri Jul 26, 2019 3:52 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 4378
You obviously can't download PcControl if you are not connected to the web - you will have to do this when you get the connection via W10 sorted

Have you waited 20+ minutes to see if the EPG populates?

You can retune using PcControl or the Channel Organiser tap.
However, you still don't have any BBC channels for PSB1 so I'm guessing that you haven't adjusted the transmitter list to cope with recent changes (i.e. I suspect you are just performing a scan using previously selected Mux Numbers).

To rescan with TM, open the PcControl| Channel Management Screen and
1) Click on the little down arrow to the right of where the mux numbers are shown.
2) Scroll down the drop down list and select "Identify My Transmitter"
3) In the new screen, select "Restrict to at least 3"
4) Double click the entry for your transmitter. If there is more than one entry, choose the one with the most recently passed date.
5) Now perform your scan as before.

BTW: What transmitter do you receive signals from?

You also have way too may channels. After the scan, right click in the display and select "All Pay, Porn, Shopping and Social". Having selected these, scan through the list and select any other channels you don't want. Then "Delete channels".


Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18
View user's profile Send private message Visit poster's website

Display posts from previous:  

All times are GMT + 1 Hour
Page 1 of 3
Goto page 1, 2, 3  Next

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum