Toppy.org.uk ~ View topic - fsCheck Reports

Author

Message

< General Toppy discussions ~ fsCheck Reports

Page 3 of 19

Goto page Previous 1, 2, 3, 4 ... 17, 18, 19 Next

chris_s

Posted: Wed Oct 02, 2013 4:45 pm

Frequent contributor Joined: 23 May 2008 Posts: 403

Code:

File System Analysis
--------------------
Generated by fsCheck 1.0 on 02/10/2013 16:36

VERDICT: The file system appears GOOD

Number of folders = 24
Number of files = 589
Capacity = 466 GB (16 GB free)

ISSUES
------
Number of corrupted file entries = 1
Number of files in wrong branch = 1 (Fix may require TopfHDRW)

/DataFiles/The Bo 2/6.rec
>>> The name contains invalid characters
This may be an indication of corruption.
Note: It is unlikely that this file can be deleted directly from a remote
computer.
To Fix: Try using a pc program, or the remote control, to rename the file to
something that is valid.
If successful, the file can then be accessed and/or deleted.

/MP3/Greatest Hits, Vol. 2/desktop.ini
>>> Expected this file to be in /ProgramFiles...
If not intentional, this may be due to a user transfer into the wrong target
folder or by a corrupted file system.
To Fix (when due to transfer): Delete or move into /ProgramFiles
To Fix (corruption): Attach disk to PC and repair with TopfHDRW.

DISK GEOMETRY
-------------
Total Sectors = 976773168 (466 GB)
Number of Clusters = 129889
Sectors Per Cluster = 7520
Sectors used by FAT = 762

DISK USAGE
----------
Number of folders = 24
Number of files = 589
Capacity = 466 GB
Free space in FAT = 16 GB (4353 clusters)
Computed free space = 16 GB (4353 clusters)

SMART DATA
----------
HDDModel: WDC WD5000AVJB-63YUA0
Firmware: 12.01C02
HDDSerial: WD-WCAS82394285
AAM: Supported (Mode 4/4: Silent)
APM: Not supported
Smart: Enabled, AutoSave On, Tests passed

Attr Description Value Worst Thr Raw Flags
0x01 Raw Read Error Rate 200 200 51 0 0x0f wpr_o_
0x03 Spin Up Time 184 181 21 5791 0x03 w___o_
0x04 Start/Stop Count 95 95 .. 5817 0x32 ___cos
0x05 Reallocated Sector Count 200 200 140 0 0x33 w__cos
0x07 Seek Error Rate 200 200 51 0 0x0e _pr_o_
0x09 Power On Hours Count 89 89 .. 8486 0x32 ___cos
0x0a Spin Retry Count 100 100 51 0 0x12 ___co_
0x0b Calibration Retry Count 100 100 51 0 0x12 ___co_
0x0c Power Cycle Count 96 96 .. 4479 0x32 ___cos
0xc0 Power-Off Retract Count 200 200 .. 18 0x32 ___cos
0xc1 Load Cycle Count 199 199 .. 5821 0x32 ___cos
0xc2 Device Temperature 119 85 .. 31 0x22 ____os
0xc4 Reallocated Event Count 200 200 .. 0 0x32 ___cos
0xc5 Current Pending Sector 200 200 .. 0 0x12 ___co_
0xc6 Uncorrectable Sector Count 200 200 .. 0 0x10 ___c__
0xc7 UDMA CRC Error Count 200 200 .. 0 0x3e _prcos
0xc8 Write Error Rate 200 200 51 0 0x08 __r___

An interpretation of the SMART data
-----------------------------------
Acronis Health Indicator = 100 %

PERFORMANCE STATISTICS
----------------------
Dynamic Memory Avail= 13663 KB
Amount Used = 251 KB
- for Analysis = 100 KB
- for Display = 151 KB
Time Taken = 12420 ms

*** END OF REPORT ***

And this is for the older 5810 running native, and yes I do know that the HDD has hit 65C, but it all looks OK (I think).

Chris.

_________________
TF5810, F/W: MS6 Recommended F/W 12/9/2009
TAPs: QuickJump 1.72; MPDisplayLITE V1.2; QuickBlank 0.2; SecCache (UK) v0.4; EIT Sub (Game) v0.6; MyInfo B5.6; EPG2MEI v0.96; MyStuff 6.5; Font Manager 1.0d; Extend v1.7; MHEG On/Off A3; (Start Channel LCN);
Sig generated by MyInfo on 14/3/12,
TV=Panasonic TX-32DT2 IDTV (32" CRT via CVBS-SCART), Tx: Sutton Coldfield. "My other PVR is a TiVo".

Geoff Bacon

Posted: Wed Oct 02, 2013 5:00 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

@chris_s

/DataFiles/The Bo 2/6.rec
>>> The name contains invalid characters
Looks like it is complaining because the name includes a / (... Bo 2/6 ...)
The next version of fsCheck will spell out the individual characters so that one can see binary non-printing characters.
You can probably rename this with Altair (but then the MyStuff entry might not be correct so might be easier to ignore it).

/MP3/Greatest Hits, Vol. 2/desktop.ini
>>> Expected this file to be in /ProgramFiles... Looks like I need to relax the rule that .ini files are only present in \ProgramFiles.

The interpretation should have mentioned that the temperature had reached 65C at some point - I'll have to check the code to see why it didn't say anything [edit](my Delphi test code noticed the temperature so I must have made a mistake converting it to C).[/edit]

Many thanks for the report.

Geoff

[edit]Chris has since clarified that
1) the / was added to the file name when he renamed it.
2) the .ini file was a consequence of him copying entire folders from his pc into the \MP3 folders (he has now deleted them).
[/edit]

Last edited by Geoff Bacon on Thu Oct 03, 2013 3:21 pm; edited 1 time in total
_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18™

luke.o

Posted: Thu Oct 03, 2013 3:14 pm

Joined: 18 Jan 2010 Posts: 22 Location: Hampshire

Hi

I'd had a few playback problems since putting in a new larger drive (after getting Andy to replace the caps) and ran this TAP the other day to see what was going on. It found loads of corrupt files and gave me helpful suggestions to fix them. So thank you for that and here is the fsCheck log (after carrying out the suggestions). Anything I should be concerned with?

Thanks

Luke

Code:

File System Analysis
--------------------
Generated by fsCheck 1.0 on 01/10/2013 21:18

VERDICT: The file system appears GOOD

Number of folders = 67
Number of files = 762
Capacity = 1397 GB (977 GB free)

ISSUES
------
Number of errors in FAT = 2
Number of failed recordings = 2

/DataFiles/__temprec__.ts
>>> File currently being modified by Time Shifting.

/DataFiles/The Wrong Mans.rec
>>> Recording in progress

/DataFiles/Boys Stuff/Ice Age_101226.rec
>>> Failed recording (Transport Stream packets not detected)
This recording does not appear to contain any useable packets.
Note: This file may be a consequence of a change in transmission around July
2013.
To Fix (if file won't play): Delete the file.
PLUS: If you haven't already rescanned since this recording, do a rescan and
delete any existing EPG files.

To Fix (if file plays): Keep file; contact the author so that it can be
analyzed.

/DataFiles/Boys Stuff/The Emperors New Groove_101003.rec
>>> Failed recording (Transport Stream packets not detected)

/ProgramFiles/Settings/MyStuff/Backups/MyStuff.dat.201309261844
>>> The FAT chain does not terminate correctly (16777215)
To Fix (assuming rest of disk ok): Start a recording and power off after 30
seconds to cause a Verify Files and Folders

/ProgramFiles/Settings/MyStuff/Backups/MyStuff_Excludes.dat.201309290846
>>> The FAT chain does not terminate correctly (16777215)

DISK GEOMETRY
-------------
Total Sectors = 2930277168 (1397 GB)
Number of Clusters = 130978
Sectors Per Cluster = 22372
Sectors used by FAT = 768

DISK USAGE
----------
Number of folders = 67
Number of files = 762
Capacity = 1397 GB
Free space in FAT = 977 GB (91542 clusters)
Computed free space = 977 GB (91540 clusters)

SMART DATA
----------
HDDModel: WDC WD15EARS-00S0XB0
Firmware: 80.00A80
HDDSerial: WD-WCC1H0012961
AAM: Not supported
APM: Not supported
Smart: Enabled, AutoSave On, Tests passed

Attr Description Value Worst Thr Raw Flags
0x01 Raw Read Error Rate 200 200 51 0 0x2f wpr_os
0x03 Spin Up Time 222 220 21 7900 0x27 wp__os
0x04 Start/Stop Count 100 100 .. 164 0x32 ___cos
0x05 Reallocated Sector Count 200 200 140 0 0x33 w__cos
0x07 Seek Error Rate 200 200 .. 0 0x2e _pr_os
0x09 Power On Hours Count 100 100 .. 480 0x32 ___cos
0x0a Spin Retry Count 100 100 .. 0 0x32 ___cos
0x0b Calibration Retry Count 100 100 .. 0 0x32 ___cos
0x0c Power Cycle Count 100 100 .. 158 0x32 ___cos
0xc0 Power-Off Retract Count 200 200 .. 10 0x32 ___cos
0xc1 Load Cycle Count 199 199 .. 5687 0x32 ___cos
0xc2 Device Temperature 104 97 .. 46 0x22 ____os
0xc4 Reallocated Event Count 200 200 .. 0 0x32 ___cos
0xc5 Current Pending Sector 200 200 .. 0 0x32 ___cos
0xc6 Uncorrectable Sector Count 200 200 .. 0 0x30 ___c_s
0xc7 UDMA CRC Error Count 200 200 .. 5 0x32 ___cos
0xc8 Write Error Rate 200 200 .. 0 0x08 __r___

An interpretation of the SMART data
-----------------------------------
Acronis Health Indicator = 100 %
The Spin Up Time is not very good.

PERFORMANCE STATISTICS
----------------------
Dynamic Memory Avail= 7975 KB
Amount Used = 271 KB
- for Analysis = 120 KB
- for Display = 151 KB
Time Taken = 12890 ms

*** END OF REPORT ***

_________________
TF5810, TS On, F/W: MS6 Recommended F/W 12/9/2009 +Bm
TAPs: EIT Sub (Game) v0.6; SecCache (UK) v0.4; EPG2MEI v0.96; Extend v1.7; MHEG On/Off A3; MyInfo B5.6; Font Manager 1.0d; MyStuff 6.5;
Sig generated by MyInfo on 3/10/13?

Geoff Bacon

Posted: Thu Oct 03, 2013 4:02 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

Hi Luke

Quote:

/DataFiles/__temprec__.ts
>>> File currently being modified by Time Shifting.

/DataFiles/The Wrong Mans.rec
>>> Recording in progress

You can ignore these (they are comments rather than issues)

Quote:

/DataFiles/Boys Stuff/Ice Age_101226.rec
/DataFiles/Boys Stuff/The Emperors New Groove_101003.rec
>>> Failed recording (Transport Stream packets not detected)

This indicates that the tap didn't find any usable information at the start of the recording (it doesn't check the whole file as that could take some time).
Please try to play these. If they don't play then delete them; if one or both plays then please send me a pm so that I can analyze them further.

Just noticed that "The Emperors New Groove_101003.rec" was recorded today i.e you should do a rescan to ensure you have a good channel line up. To avoid problems, do not use the FastScanGUI tap or a native scan; use TopManager (on a windows pc) or the ChannelOrganiser tap. It is important that you scan from the correct transmitter and that you remove duplicates and trash channels.
[edit]The file was recorded in 2010 - what was I thinking? Therefore no need for a rescan[/edit]

Quote:

The FAT chain does not terminate correctly (16777215)

The disk areas allocated to a file are stored as linked chains in the File Allocation Table (FAT) where each entry points to the next entry in the FAT. To signal the end of the chain, the last entry should specify 16777214 but this is missing in your case (16777215 signals that it is a free disk cluster).

You could try the suggested fix but, as both your files are MyStuff related and, are unlikely to exceed one disk cluster (sectors per cluster * 512 bytes) you can probably ignore it (especially as MS should clean them away after 30 days or so - assuming MS 6.5 and depending on how many old backups you have opted to keep).

Alternatively, I think you could just delete these two files using TM, Altair, Antares or TopSet (there should be more recent MS backups); suggest you reboot toppy after deleting them.

Re "The Spin Up Time is not very good"; I arbitrarily define good as being 7 seconds or less (<=7000). Some disks are quicker than others and there isn't anything you can do to improve it, so, if it is working, just live with it. Note: if over time, the spin up time gets "longer" from what it is now, this could indicate that the drive is experiencing mechanical issues (this would be confirmed by the presence of reallocated sectors etc).

In your case, the drive looks sound.

Geoff

Last edited by Geoff Bacon on Thu Oct 03, 2013 4:52 pm; edited 1 time in total
_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18™

anthony2l

Posted: Thu Oct 03, 2013 4:20 pm

Frequent contributor Joined: 26 Apr 2011 Posts: 234

Here's mine:

Code:

Header of \ProgramFiles\Utilities\fsCheck.tap
---------------------------------------------
TAP Id : 47434231
TAP Name : fsCheck 1.0
TAP Author: Geoff Bacon
TAP Desc. : File System Check (of key structures)
TAP Etc : Sep 17 2013

Contents of \ProgramFiles\Logs\fsCheck_2013-10-03_16-10.log
-----------------------------------------------------------
File System Analysis
--------------------
Generated by fsCheck 1.0 on 03/10/2013 16:10

VERDICT: The file system appears GOOD

Number of folders = 24
Number of files = 388
Capacity = 466 GB (217 GB free)

No issues found

/DataFiles/__temprec__.ts
>>> File currently being modified by Time Shifting.

DISK GEOMETRY
-------------
Total Sectors = 976773168 (466 GB)
Number of Clusters = 129889
Sectors Per Cluster = 7520
Sectors used by FAT = 762

DISK USAGE
----------
Number of folders = 24
Number of files = 388
Capacity = 466 GB
Free space in FAT = 217 GB (60514 clusters)
Computed free space = 217 GB (60514 clusters)

SMART DATA
----------
HDDModel: WDC WD5000AVDS-63U7B1
Firmware: 01.00A01
HDDSerial: WD-WCAV97238114
AAM: Supported (Mode 4/4: Silent)
APM: Not supported
Smart: Enabled, AutoSave On, Tests passed

Attr Description Value Worst Thr Raw Flags
0x01 Raw Read Error Rate 200 200 51 0 0x2f wpr_os
0x03 Spin Up Time 192 188 21 3391 0x27 wp__os
0x04 Start/Stop Count 99 99 .. 1682 0x32 ___cos
0x05 Reallocated Sector Count 200 200 140 0 0x33 w__cos
0x07 Seek Error Rate 200 200 .. 0 0x2e _pr_os
0x09 Power On Hours Count 92 92 .. 5843 0x32 ___cos
0x0a Spin Retry Count 100 100 .. 0 0x32 ___cos
0x0b Calibration Retry Count 100 100 .. 0 0x32 ___cos
0x0c Power Cycle Count 99 99 .. 1588 0x32 ___cos
0xc0 Power-Off Retract Count 200 200 .. 57 0x32 ___cos
0xc1 Load Cycle Count 200 200 .. 2987 0x32 ___cos
0xc2 Device Temperature 112 94 .. 31 0x22 ____os
0xc4 Reallocated Event Count 200 200 .. 0 0x32 ___cos
0xc5 Current Pending Sector 200 200 .. 0 0x32 ___cos
0xc6 Uncorrectable Sector Count 100 253 .. 0 0x30 ___c_s
0xc7 UDMA CRC Error Count 200 200 .. 1 0x32 ___cos
0xc8 Write Error Rate 100 253 .. 0 0x08 __r___

An interpretation of the SMART data
-----------------------------------
Acronis Health Indicator = 100 %

PERFORMANCE STATISTICS
----------------------
Dynamic Memory Avail= 8020 KB
Amount Used = 235 KB
- for Analysis = 84 KB
- for Display = 151 KB
Time Taken = 4890 ms

*** END OF REPORT ***

_________________
TF5810, TS On, F/W: MS6 Recommended F/W 12/9/2009 +Bm
TAPs: PcControl B1.4; EPG2MEI v0.96; MyStuff 6.6; MyInfo B5.6; Font Manager 1.0d; Extend v1.7; SecCache (UK) v0.4; EIT Sub (Game) v0.6; MHEG On/Off A3; MPDisplayLITE V1.2; PruneEPG 1.0;
Sig generated by EMJB's MyInfo.tap on 31/12/18
Caps 31/07/13; Turbosat 500Gb SATA™

luke.o

Posted: Thu Oct 03, 2013 4:25 pm

Joined: 18 Jan 2010 Posts: 22 Location: Hampshire

Hi Geoff

Quote:

Please try to play these.
...
Just noticed that "The Emperors New Groove_101003.rec" was recorded today

They both play fine. I don't believe that was recorded that day, I think it was recorded a couple of years ago (I will see what channel it was on when I get home and check radio times listing). I always use ChannelOrganiser and keep the number of channels down, but I'll do a retune just in case.

Incidentally, the playback problems I was getting was recordings just stopping with the native Toppy message "playback stopped" appearing. It happened on a few recordings (BBC 2 and Channel 4 iirc) which fsCheck picked up. I did a VF&F, but it just truncated the recordings to the affected timestamp, so I deleted them.
I only mention this in case it has some relevance.

Geoff Bacon

Posted: Thu Oct 03, 2013 4:49 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

@anthony2l

Thanks for posting your report; it all looks fine.

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18™

MikB

Posted: Sat Oct 05, 2013 10:48 am

Frequent contributor Joined: 23 Sep 2006 Posts: 286 Location: West Midlands

Hi Geoff, just tested out fsCheck 1.0, another "boring" one, but a couple of hints :-

The 2 "bad recordings" are short because they are pieces clipped from a longer programme, using TF's onboard editing system.

Maybe there needs to be a check for "(CUT)" in the name as an excuse for being short? Or changing it from an error to a warning: "Did you edit this?" Smile

Scraped from the serial port ...

Code:

fsC: File System Analysis
fsC: --------------------
fsC: Generated by fsCheck 1.0 on 05/10/2013 10:40
fsC:
fsC:
fsC: VERDICT: The file system appears GOOD
fsC:
fsC: Number of folders = 15
fsC: Number of files = 131
fsC: Capacity = 149 GB (121 GB free)
fsC:
fsC: ISSUES
fsC: ------
fsC: Number of bad recordings = 2
fsC:
fsC: /DataFiles/__temprec__.ts
fsC: >>> File currently being modified by Time Shifting.
fsC:
fsC: /DataFiles/Transfer PC/Neighbours(CUT)-1.rec
fsC: >>> Bad recording (file too short or has invalid header)
fsC: To Fix (Mystuff running): Delete from "[Bad Files]" folder.
fsC: To Fix (otherwise): Delete the file using the remote control or via a pc
fsC: program.
fsC:
fsC: /DataFiles/Transfer PC/Done/BBmerdaleCORO MON(CUT)-1.rec
fsC: >>> Bad recording (file too short or has invalid header)
fsC:
fsC: DISK GEOMETRY
fsC: -------------
fsC: Total Sectors = 312581808 (149 GB)
fsC: Number of Clusters = 127896
fsC: Sectors Per Cluster = 2444
fsC: Sectors used by FAT = 750
fsC:
fsC: DISK USAGE
fsC: ----------
fsC: Number of folders = 15
fsC: Number of files = 131
fsC: Capacity = 149 GB
fsC: Free space in FAT = 121 GB (103864 clusters)
fsC: Computed free space = 121 GB (103864 clusters)
fsC:
fsC: SMART DATA
fsC: ----------
fsC: HDDModel: SAMSUNG SV1604E
fsC: Firmware: VW100-06
fsC: HDDSerial: S06BJ10Y601851
fsC: AAM: Supported (Mode 1/4: Off)
fsC: APM: Not supported
fsC: Smart: Enabled, AutoSave On, Tests passed
fsC:
fsC: Attr Description Value Worst Thr Raw Flags
fsC: 0x01 Raw Read Error Rate 100 100 51 0 0x0f wpr_o_
fsC: 0x03 Spin Up Time 100 100 25 5184 0x07 wp__o_
fsC: 0x04 Start/Stop Count 97 97 .. 3733 0x32 ___cos
fsC: 0x05 Reallocated Sector Count 100 100 11 0 0x33 w__cos
fsC: 0x07 Seek Error Rate 100 100 51 0 0x0f wpr_o_
fsC: 0x08 Seek Time Performance 100 100 15 0 0x25 wp___s
fsC: 0x09 Power On Hours Count 90 90 .. 6344109 0x32 ___cos
fsC: 0x0a Spin Retry Count 100 100 51 0 0x33 w__cos
fsC: 0x0b Calibration Retry Count 100 100 .. 0 0x12 ___co_
fsC: 0x0c Power Cycle Count 99 99 .. 1053 0x32 ___cos
fsC: 0xc2 Device Temperature 127 70 .. 37 0x22 ____os
fsC: 0xc3 Hardware ECC Recovered 100 100 .. 921061 0x1a __rco_
fsC: 0xc4 Reallocated Event Count 100 100 .. 0 0x32 ___cos
fsC: 0xc5 Current Pending Sector 100 100 .. 0 0x12 ___co_
fsC: 0xc6 Uncorrectable Sector Count 100 100 .. 0 0x30 ___c_s
fsC: 0xc7 UDMA CRC Error Count 200 200 .. 0 0x3e _prcos
fsC: 0xc8 Write Error Rate 100 100 51 0 0x0a __r_o_
fsC: 0xc9 Off Track Errors 100 100 51 0 0x0a __r_o_
fsC:
fsC: An interpretation of the SMART data
fsC: -----------------------------------
fsC: Acronis Health Indicator = 100 %
fsC: ExplainFMT = &{ }%s
fsC:
fsC: PERFORMANCE STATISTICS
fsC: ----------------------
fsC: Dynamic Memory Avail= 9002 KB
fsC: Amount Used = 203 KB
fsC: - for Analysis = 52 KB
fsC: - for Display = 151 KB
fsC: Time Taken = 1990 ms
fsC:
fsC: *** END OF REPORT ***
fsC:
fsC: To close, press EXIT on remote (or press RECORD to write file and close)
fsC:

_________________
Toppy Taps: http://toppy.signal11.org.uk

TF5800, IA On, TS On, F/W: 5.13.65T 14/4/2009 -AbCkEeEfEpHeKtRaRhRsSdStSyTeTfTpTsVr+Pf
TAPs: DescriptionExtender 2.1; MeiSearch 1.30; EPG Clean V1.01 Dev Version; EPGnavigator v5.1c; MyInfo B5.6;
Sig generated by MyInfo on 17/1/15

philbrown

Posted: Sun Oct 06, 2013 6:01 pm

Regular contributor Joined: 30 Mar 2006 Posts: 55

Hi Geoff

Just stumbled upon fsCheck when browsing. Effortlessly installed and run with TM. Looks okay but posted as requested.

Phil

Code:

File System Analysis
--------------------
Generated by fsCheck 1.0 on 06/10/2013 17:46

VERDICT: The file system appears GOOD

Number of folders = 29
Number of files = 706
Capacity = 233 GB (10 GB free)

No issues found

/DataFiles/__temprec__.ts
>>> File currently being modified by Time Shifting.

/DataFiles/The Great British Year.rec
>>> Recording in progress

DISK GEOMETRY
-------------
Total Sectors = 488397168 (233 GB)
Number of Clusters = 129891
Sectors Per Cluster = 3760
Sectors used by FAT = 762

DISK USAGE
----------
Number of folders = 29
Number of files = 706
Capacity = 233 GB
Free space in FAT = 10 GB (5413 clusters)
Computed free space = 10 GB (5413 clusters)

SMART DATA
----------
HDDModel: SAMSUNG SP2514N
Firmware: VF100-33
HDDSerial: S08DJ1NA101295
AAM: Supported (Mode 1/4: Off)
APM: Not supported
Smart: Enabled, AutoSave On, Tests passed

Attr Description Value Worst Thr Raw Flags
0x01 Raw Read Error Rate 253 253 51 0 0x0f wpr_o_
0x03 Spin Up Time 100 100 25 4416 0x07 wp__o_
0x04 Start/Stop Count 77 77 .. 23981 0x32 ___cos
0x05 Reallocated Sector Count 253 253 10 0 0x33 w__cos
0x07 Seek Error Rate 253 253 51 0 0x0f wpr_o_
0x08 Seek Time Performance 253 253 15 0 0x25 wp___s
0x09 Power On Hours Count 100 100 .. 26003 0x32 ___cos
0x0a Spin Retry Count 253 253 51 0 0x33 w__cos
0x0b Calibration Retry Count 253 2 .. 0 0x12 ___co_
0x0c Power Cycle Count 90 90 .. 10854 0x32 ___cos
0xbe Airflow Temperature 85 85 .. 51 0x22 ____os
0xc2 Device Temperature 85 85 .. 51 0x22 ____os
0xc3 Hardware ECC Recovered 100 100 .. 471480 0x1a __rco_
0xc4 Reallocated Event Count 253 253 .. 0 0x32 ___cos
0xc5 Current Pending Sector 100 100 .. 2 0x12 ___co_
0xc6 Uncorrectable Sector Count 253 253 .. 0 0x30 ___c_s
0xc7 UDMA CRC Error Count 200 200 .. 0 0x3e _prcos
0xc8 Write Error Rate 100 100 .. 0 0x0a __r_o_
0xc9 Off Track Errors 253 253 .. 0 0x0a __r_o_

An interpretation of the SMART data
-----------------------------------
Acronis Health Indicator = 98 %
The Current Pending Sector, a critical attribute, shows that 2 sectors are waiting
to be remapped.

PERFORMANCE STATISTICS
----------------------
Dynamic Memory Avail= 9670 KB
Amount Used = 267 KB
- for Analysis = 116 KB
- for Display = 151 KB
Time Taken = 4280 ms

*** END OF REPORT ***

_________________
TF5800t, TS On, F/W: MS6 Recommended F/W 12/9/2009
TAPs: PcControl B1.4; EPG2MEI v0.96; Surfer v0.14; SecCache (UK) v0.4; WSSkiller V2.12d; Font Manager 1.0d; Extend v1.7; MyInfo B5.6; MyStuff 6.6; EIT Sub (Game) v0.6; MHEG Control B2.1; PruneEPG 1.0;
Sig generated by MyInfo on 8/8/17?

Geoff Bacon

Posted: Sun Oct 06, 2013 6:26 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

@philbrown

Thanks for the report.

It all looks fine apart from the 2 pending sectors. Should these sectors deteriorate, the drive will attept to remap them resulting in the ReAllocated Sector Count increasing to 2 and the Pending Sector Count being set back to 0.

Might be worth running again in a few weeks to see if it has changed (ideally, you don't want these numbers to increase).

Cheers
Geoff

Geoff Bacon

Posted: Sun Oct 06, 2013 7:06 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

@MikB

I have modified the code in the next version so that it won't check the duration of any recording that includes "CUT" in its name.

These files can be generated by several mechanisms including the CutFile tap, the CutAds tap and saving using the native White and Blue buttons. The CUT can appear in several places in the file name but the common characteristic is that it is uppercase (it will not be the end of the world if the true name of a file includes these three characters)

For other readers, the criteria I'm using for a good recording is that used by MyStuff:-
1) a file must be > 0.34 * 1024 * 1024 bytes
2) it must start with the correct magic number ( "TFrc" or 0x54467263)
3) the duration field (5th word) should be > 0.
The file is flagged as a BadRecording if it fails any of the these three tests.
(In MikB's files, the duration was 0 as the cut portion was less than a minute long).

I've also modified the code so that, when possible, it will indicate which of these tests failed (makes it easier to understand why the file is flagged).

@luke.o

CutsAds is also the source of "Failed recording (Transport Stream packets not detected)" flags on recordings that play properly (basically CutAds replaces the packets at the start of the file with NULL packets and therefore the tap cannot detect the correct PID information near the start of the recording).
Rather than reading further into the file (slow), I have modified the next version so that it bypasses the check for the transport streams if it detects one of these NULL packets.

Many thanks to both MikB and luke.0 for their help in diagnosing these problems

Geoff

MikB

Posted: Sun Oct 06, 2013 7:38 pm

Frequent contributor Joined: 23 Sep 2006 Posts: 286 Location: West Midlands

Very practical solution to a hopefully rare problem Smile

Glad to have helped!

Mike.

luke.o

Posted: Mon Oct 07, 2013 9:26 am

Joined: 18 Jan 2010 Posts: 22 Location: Hampshire

Thank you Geoff for creating the tap. Without it I would have just carried on regardless and the problems I was having would not have fixed themselves!

Luke

Geoff Bacon

Posted: Tue Oct 08, 2013 12:27 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4385

I have now uploaded v1.1 of fsCheck.tap.

For details, see File System Check or http://www.geeceebee.co.uk/fschecktap/history

Geoff

anthony2l

Posted: Tue Oct 08, 2013 1:37 pm

Frequent contributor Joined: 26 Apr 2011 Posts: 234

Geoff Bacon wrote:

I have now uploaded v1.1 of fsCheck.tap.

For details, see File System Check or http://www.geeceebee.co.uk/fschecktap/history

Geoff

Just hung my Toppy Sad

Did upgrade via TM. Run whilst watch BBC1.
Analysing File System - Please Wait ..

File system appears good etc
No issues found
/DataFiles/_temprec_.ts
>>> File currently being modified by Time Shifting (you can ignore this).
DISK GEOMETRY
---------------------------------------------------------------
Press EXIT to cancel Analysis

Now frozen.

Power off (via remote) and on - Verifying files and folders

Toppy seems ok but not going to retry just yet.

All times are GMT + 1 Hour

View next topic View previous topic Page 3 of 19 Goto page Previous 1, 2, 3, 4 ... 17, 18, 19 Next Toppy.org.uk Forum Index ~ General Toppy discussions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum