Toppy.org.uk ~ View topic - USB Accelerator

Author

Message

< Firmwares, enhancements and upgrades ~ USB Accelerator

Page 13 of 14

Goto page Previous 1, 2, 3 ... , 12, 13, 14 Next

RedandBlueArmy

Posted: Fri Dec 24, 2010 11:19 am

Frequent contributor Joined: 01 Apr 2008 Posts: 276 Location: Crystal Palace

Geoff Bacon wrote:

Don't forget that when turbo is enabled, you can't use the remote and it prevents recordings from starting - there may also be other gotchas!

Geoff

Found that out sometime ago when I missed the recording of my Favourite Film.........................ZULU Crying or Very sad

_________________
TF5810, F/W: MS6 Recommended F/W 12/9/2009 +PpUUu
TAPs: EPG2MEI v0.96; MyStuff 6.4; Font Manager 1.0d; Extend v1.7; SecCache (UK) v0.4; EIT Sub (Game) v0.6; MyInfo B5.6; MHEG On/Off A3;
Sig generated by MyInfo on 27/4/12

RedandBlueArmy

Posted: Fri Dec 24, 2010 11:20 am

Frequent contributor Joined: 01 Apr 2008 Posts: 276 Location: Crystal Palace

Geoff Bacon wrote:

Just noticed that you copied the dll into Windows\System32.
This was not necessary, you only need it in the folder containing Altair.
Suggest you remove from Windows\System32

Geoff

You are far too quick Laughing

See my Edit earlier Shocked

Its great to know people are here on Xmas Eve ready to help out.

Many many thanks

Last edited by RedandBlueArmy on Fri Dec 24, 2010 11:22 am; edited 1 time in total
_________________
TF5810, F/W: MS6 Recommended F/W 12/9/2009 +PpUUu
TAPs: EPG2MEI v0.96; MyStuff 6.4; Font Manager 1.0d; Extend v1.7; SecCache (UK) v0.4; EIT Sub (Game) v0.6; MyInfo B5.6; MHEG On/Off A3;
Sig generated by MyInfo on 27/4/12

Geoff Bacon

Posted: Fri Dec 24, 2010 11:21 am

Frequent contributor Joined: 12 Jan 2007 Posts: 4492

My brother has watched Zulu over 50 times (and that was 5 years ago). From what I remember, it always has the same ending!

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+EvEzPfUUuZ
TAPs: PcControl B1.4; StopExit v1.01; PruneEPG 1.0; fsSave 1.1; QuickJump 1.72; SecCache (UK) v0.4; EIT Sub (Game) v0.6; EPG2MEI v0.96; MyStuff 6.6; Bookmark 3.0; Extend v1.7; Font Manager 1.0d; MyInfo B5.6; MHEG On/Off A3;
Sig generated by EMJB's MyInfo.tap on 29/12/18™

RedandBlueArmy

Posted: Fri Dec 24, 2010 11:24 am

Frequent contributor Joined: 01 Apr 2008 Posts: 276 Location: Crystal Palace

Geoff Bacon wrote:

My brother has watched Zulu over 50 times (and that was 5 years ago). From what I remember, it always has the same ending!

Geoff

I think I must have equalled that ............... please don't ruin the end Laughing

Do you know who the first person to be shot in Zulu was? Surprised

Geoff Bacon

Posted: Fri Dec 24, 2010 11:33 am

Frequent contributor Joined: 12 Jan 2007 Posts: 4492

You are too late to send him a Christmas card - the "last post" has been

Geoff

msteggalls

Posted: Fri Dec 24, 2010 12:31 pm

Frequent contributor Joined: 22 Apr 2005 Posts: 721 Location: Ipswich, UK

RedandBlueArmy wrote:

Found that out sometime ago when I missed the recording of my Favourite Film.........................ZULU Crying or Very sad

Don't worry it's on again over Christmas Smile

29-Dec Channel 4 at 13:35

Martyn

_________________
Model: TF5800 Silver; Disk: Samsung 300gb ; Firmware: 5.13.65 Patched; Purchased: 15-Apr-2005;
Autostart TAPs: Improbox (2.5) TF5000 Display (1.53a); Description Extender (2.23); Filer (2.21RC3); Extend (1.7); stirf (1.3Cbeta); EPGnavigator (6.10); UK Auto Scheduler (0.73)
TV: Panasonic TX-L37V20B LCD; Remote: Samsung Note 10.1 running Touchsquid
Updated 26Oct14

RedandBlueArmy

Posted: Fri Dec 24, 2010 1:26 pm

Frequent contributor Joined: 01 Apr 2008 Posts: 276 Location: Crystal Palace

The first person to be shot at was Will.
( The sergeant obviously didn't like him as he said... "Fire At Will" Laughing

)

Ok all done now thanks for ALL your help.

Before Patch on Turbo transfer from PVR 5810 to PC

2.981,536kb = 19 mins 50 sec

After Patch on Turbo transfer from PVR 5810 to PC

2.981,536kb = 12 mins 36 sec

andyfras

Posted: Fri Dec 24, 2010 4:51 pm

Frequent contributor Joined: 25 Jul 2005 Posts: 3468

It has been suggested that selecting a menu that kills the picture and sound before beginning the transfer can also speed it up. Although I haven't timed it, it does seem faster.

_________________
Toppy PSU repair service or capacitor kits for DIY available - PM me for details.
MyStuff 6.6 : Little Clock : MHEGOnOff : Extend : EPG2MEI : SecCache : EIT_Sub : TSSaver : Prune EPG
Channel Organiser : Tap Commander : HDD Info : PCControl : Signal Monitor : MyInfo
URC-7555 remote: TF5800 320GB 2.5", Recommended_5800.tfd + CfPePsScUUuWfZ

Doct0r

Posted: Wed Dec 29, 2010 2:35 pm

Frequent contributor Joined: 01 Jun 2010 Posts: 353 Location: Birmingham

I've just added the U and Uu patches to both my Toppies and got a huge speed increase in transfer rates.

I'm going to have to test more to check my figures aren't wrong but I used to get 2.44MB/s (might have been higher), now I'm getting at least 4.18MB/s.

I tested using a 1GB file. It took around 7 minutes without the patches, it's now around 4 minutes.

This is running it in Turbo Mode. When not in Turbo Mode, the 1GB file transfers in around 7 minutes.

I can't believe I waited this long to test these patches, IMO they are essential.

_________________
TF5810, , F/W: MS6 Recommended F/W 12/9/2009 +R2UUuVb
TAPs: EPG2MEI v0.96; MyStuff 6.4; Extend v1.7; MyInfo B5.5; SecCache (UK) v0.4; Font Manager 1.0d; EIT Sub (Game) v0.6;
Sig generated by MyInfo on 17/5/11?

MarkPax

Posted: Tue Jan 18, 2011 7:28 pm

Frequent contributor Joined: 07 Nov 2010 Posts: 520

USB Upload Accelerator + MacTF?

Hi, I'm trying to increase my upload speed using the TAPs in PatchPack. I installed usb_upload.TAP into Program Files and ran it on my Toppy. I then tried uploading a 1 Gbyte file with MacTF in Turbo mode. The transfer speed was not obviously different from without usb_upload. About 12 mins for 1 Gbyte = 1.4 Mbyte/sec, so about the same as before.

Questions:-
- what kind of improvement to upload speed could I expect to see?
- did I do anything wrong?
- do I need to run both TAPs to get just an upload improvement?
- there are some comments about "special" settings for MacTF. Not clear what these might be?

thanks in advance

_________________
TF5800t, TS On, F/W: MS6 Recommended F/W 12/9/2009 +PeR0UUuWfZ
TAPs: TAP Commander 1.34; TommyFF v2.1; BlankStuff v2.5; MyInfo B5.5; EPG2MEI v0.96; MyStuff 6.5; Font Manager 1.0d; Extend v1.7; SecCache (UK) v0.4; EIT Sub v0.6; TF5000 Display v1.53;
Sig generated by MyInfo on 19/5/11

MarkPax

Posted: Wed Jan 19, 2011 8:01 pm

Frequent contributor Joined: 07 Nov 2010 Posts: 520

I've answered some of my own questions
- about 40% improvement
- just the upload TAP (I'm using the TAP so far, not the patch)
- it doesn't seem to work with MacTF. Works fine with Altair and the new .dll though.

Geoff Bacon

Posted: Wed Jan 19, 2011 8:47 pm

Frequent contributor Joined: 12 Jan 2007 Posts: 4492

I would still have expected the [U] patch to have shown an effect when transferring files to the Mac.

The accelerator patches work by disabling software CRC checking when transmitting data [U] from the toppy or sending data [Uu] to the toppy. These patches only disable the CRC checks on the toppy end - you also need to make the host computer aware that CRC checks should not be performed. For windows, this is done by using a modified DLL. I've no idea what happens on the mac - it may be there is no such modification or it may be that the modification has always been present. This may explain why you saw no change in performance.

Geoff

PeteY

Posted: Fri Jan 21, 2011 1:51 am

Frequent contributor Joined: 08 Dec 2006 Posts: 164 Location: Lombardy, Italy

I don't use MacTF but MPEG Streamclip on the Mac does support USB acceleration.

_________________
Toppy: TF5800PVR 250GB Firmware: 1365 Patched
No TAPs ATM

MarkPax

Posted: Fri Jan 21, 2011 8:53 am

Frequent contributor Joined: 07 Nov 2010 Posts: 520

MPEGStreamClip is nicer and more stable as well. The only thing I miss from MacTF is drag and drop. Thanks.

cawright1

Posted: Wed Jun 29, 2016 7:17 pm

Frequent contributor Joined: 31 Oct 2008 Posts: 145

just found out about these patches. Have questions: - Altair wont run on my W10 laptop so I use Antatres. Will these patches speed up transfers with Antares, ot are they solely for Altair?

_________________
TF5800t, F/W: 5.13.65T 14/4/2009 +AbCpCwDeFmOtReSlTdTeWfXl
TAPs: PcControl B1.4; EPG2MEI v0.96; FreeSpaceBar1.1n; Font Manager 1.0d; SecCache (UK) v0.4; EIT Sub (Game) v0.6; PruneEPG 1.0; MHEG On/Off A3; MyInfo B5.6; QuickJump 1.72; (Start Channel LCN);
Sig generated by MyInfo on 13/5/15** Windows 10 Home 64 bit **?

All times are GMT + 1 Hour

View next topic View previous topic Page 13 of 14 Goto page Previous 1, 2, 3 ... , 12, 13, 14 Next Toppy.org.uk Forum Index ~ Firmwares, enhancements and upgrades

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum