| Author |
Message |
|
|
Page 1 of 1
|
| wro |
 Posted: Mon Oct 15, 2007 10:32 pm |
 |
|
|
Regular contributor
Joined: 30 Aug 2005
Posts: 89
|
| I did a rescan yesterday (Sun 14 OCt) to get all the new channel numbers right after C4 + 1 came out, that was OK , but now Film4 has disappeared, I'm sure I saw a thread about this a few weeks ago but can't find it now. I too have "Dave" at 12, and I've lost UKTV History. I'll do another rescan tomorrow, but if anyone can enlighten me as to which channel it should be on I'd be grateful |
|
|
| Back to top |
 
|
| maverick |
| Posted: Mon Oct 15, 2007 11:23 pm |
|
|
|
Frequent contributor
Joined: 12 Jun 2005
Posts: 597
Location: Tunbridge Wells
|
Do a factory reset before doing a rescan. Unfortunately, rescanning alone does not remove old channels just finds new ones and confuses the whole thing.
HTH, |
_________________
TF5800 1.5Tb, TS On, F/W: 5:13:65T PaTcHeD
TAPs: EPG2MEI v0.96; Extend v1.7; Font Manager 1.0d; MyInfo B4.0; MyStuff 6.1; SecCache (UK) v0.4; Skip 1.34a (TF5800PVR); Super PiP 1.1b; TSSaver v0.5; EIT Sub v0.6;
Sig generated by MyInfo on 31/10/09 |
|
| Back to top |
|
| wro |
| Posted: Tue Oct 16, 2007 7:28 pm |
|
|
|
Regular contributor
Joined: 30 Aug 2005
Posts: 89
|
maverick wrote: Do a factory reset before doing a rescan. Unfortunately, rescanning alone does not remove old channels just finds new ones and confuses the whole thing.
HTH,
I did!
I was upgrading my TAPs (EPGNav, Quickjump & Desc Ext), so I removed the old ones, did a factory reset and then rescanned and then put back the latest versions of the 3 TAPs.
Because I pick up signals from 2 transmitters I specify the "channel" number with a manual scan.
OOPS! I've just realised what I've done - or not done! I didn't scan for Mux D! Doooh!
Thanks for the reply anyway! |
|
|
| Back to top |
|
|
|
|
