Toppy.org.uk ~ View topic - Segmentation Fault using php

Author

Message

< Computer connections ~ Segmentation Fault using php

Page 1 of 1

biggsd

Posted: Tue Apr 03, 2012 2:25 pm

Regular contributor Joined: 15 Dec 2008 Posts: 95

Hi folks,
For some reason that now escapes me, I thought it would be a good idea to update the packages on my Asus to the latest versions.

I updates the ipkg.conf file to point to http://ipkg.nslu2-linux.org/feeds/optware/oleg/cross/stable and then did the ipkg upgrade

All seemed to go OK except after it finished the Asus was complaining that it couldn't find /opt/sbin/ftpd-topfield (despite the file being in that folder)

After finding a post that described the ftpd-topfield problem I got that working again, but now php is giving me a Segmentation Fault message when I try to run it.

Obviously something is out of sync but ipkg update/upgrade doesn't find anything.

Anyone got any ideas?
Cheers
Dave

_________________
TF5800, IA On, TS On, F/W: 13.65AbBfBqBrC0CeCfCkCtCwCyDeDsEcEfErEsFGmHHeIKtMhNfOtPPcPfRRaReRhRpRsSSdSlSrStSyT2TdTfTsWfXpXw
TAPs: SecCache (UK) v0.4; EIT Sub v0.6; UK Auto Scheduler v0.73.1; EPGnavigator 6.0.5; MyInfo B4.0;
Sig generated by MyInfo on 14/9/09

billmars

Posted: Tue Apr 03, 2012 4:51 pm

Frequent contributor Joined: 17 Sep 2005 Posts: 678 Location: Hull

I see that a new php version is available (5.2.17-1 to 5.2.17-2) which I assume you upgraded to. From past experience a new version of php has not always worked well on my slug, so I'll not be upgrading until I've done a bit of research first. The problem is if you have upgraded there doesn't seem to be any way of going back to the previous version.
But maybe this error has nothing to do with the php upgrade!
Sorry, this doesn't help you much!

_________________
BM
Firmware
5800 Samsung 1Tb Autostart TAPs: Extend 1.7;TSRCommander 1.5;TF5000 Display 1.53;EPG2MEI 0.95;MyStuff 6.4;QuickJump 1.72;Power Down 0.75;SecCache 0.4;TSSaver 0.4;MHEG Control B2;eit_sub_sng 0.6 Transmitter: Belmont Extras: rt2mei (via NSLU2)

biggsd

Posted: Tue Apr 03, 2012 5:16 pm

Regular contributor Joined: 15 Dec 2008 Posts: 95

Oh bother! Mad

I was afraid that was going to be the case.

Do you know if there's another way of getting the Radio Times data without using Wooders' RT2MEI (which relies on php to do the work) ?

Thanks for the reply anyway.
Dave

juwlz

Posted: Tue Apr 03, 2012 7:13 pm

MyStuff Team Joined: 12 Aug 2005 Posts: 9643 Location: Wokingham, Berkshire (Hannington transmitter)

There's a version of rt2mei that runs under Windows. Perhaps you could cobble something together that just uses the Asus for the file transfer from a PC to your Toppy? (Or rather, initiates ftp on the PC to connect to the Toppy via the Asus to transfer it?)

Julie

_________________
5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+BmC0CfCtFsIMPePsR3UUuUxZ
5810, TS On, F/W: F/W: MS6 Recommended F/W 12/9/2009 +BmCfCtFsR3Z
MyStuff info; Help!
Harmony 885 remote. Sig date 8 April 2012

billmars

Posted: Tue Apr 03, 2012 7:17 pm

Frequent contributor Joined: 17 Sep 2005 Posts: 678 Location: Hull

You can try using rt2mei under Windows, Linux or Mac - link:-
http://www.wooders.co.uk/rt2mei/windows.php
When past php problems on slugs etc.have arisen, other platforms have worked.

All times are GMT

View next topic View previous topic Page 1 of 1 Toppy.org.uk Forum Index ~ Computer connections

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum