Toppy.org.uk ~ View topic - MyStuff 5.21a Bug and Feature Posts Only

Author

Message

< MyStuff ~ MyStuff 5.21a Bug and Feature Posts Only

Page 16 of 80

Goto page Previous 1, 2, 3 ... 15, 16, 17 ... 78, 79, 80 Next

BobD

Posted: Thu Feb 22, 2007 10:42 am

MyStuff Team Joined: 03 Aug 2005 Posts: 4025 Location: Nottingham

I have updated the bugs and NextVersion pages, if anyone wants to take a peek.

_________________
FW: ChunkyWizard Recommended
TAPs: MyStuff (always one version ahead of everyone else!), TF5000 Display, epg2mei
MyStuff skins, manual and latest version: http://www.BobDsMyStuff.co.uk
Known bugs & forthcoming fixes: http://www.BobDsMyStuff.co.uk/Bugs.shtml

Bawbagg

Posted: Thu Feb 22, 2007 11:21 am

MyStuff Team Joined: 11 Aug 2005 Posts: 1121

I've created a thread in the TAP development are to discuss proposals for a MyStuff API - allowing timer import/export command files etc.

http://forum.toppy.org.uk/forum/viewtopic.php?p=97202#97202

Could any interested parties (nigel, blowback, ichilton, RogDog and anyone else who hasn't made themselves known to us Very Happy

) check my suggestions, and either accept, or offer alternatives in that thread.

Thanks,

BB

_________________
TAPs: MyStuff Something or other + whatever CW recommends
MEI readme and latest version at http://my.opera.com/bawbagg
Current MyStuff Known Bugs http://www.BobDsMyStuff.co.uk/Bugs.shtml

sanecyclist

Posted: Thu Feb 22, 2007 12:29 pm

Frequent contributor Joined: 10 May 2006 Posts: 817

Thanks BobD.

Quote:

Current (P) implemented as a start channel for EPG

Does this mean the current channel appears on the top of the grid? Any chance you could put the page-by-page view in as well?

chunkywizard

Posted: Thu Feb 22, 2007 12:33 pm

MyStuff Team Joined: 13 May 2005 Posts: 9219 Location: Sindlesham, Berkshire Tx: Hannington

sanecyclist wrote:

Thanks BobD.

Quote:

Current (P) implemented as a start channel for EPG

Does this mean the current channel appears on the top of the grid? Any chance you could put the page-by-page view in as well?

It's a bad description by Bob, this is the page-by-page view

HTH

CW

moley6knipe

Posted: Thu Feb 22, 2007 12:35 pm

Frequent contributor Joined: 31 Aug 2005 Posts: 863 Location: Spalding, Lincs, UK

Some very nice changes there guys! Good work.

_________________
Firmware 5.13.65 patched; Waltham TX; Samsung T133 Series 400LD 400Gb HDD

sanecyclist

Posted: Thu Feb 22, 2007 12:36 pm

Frequent contributor Joined: 10 May 2006 Posts: 817

chunkywizard wrote:

this is the page-by-page view

Great. Cheers!

guru

Posted: Thu Feb 22, 2007 1:07 pm

Joined: 16 Jan 2007 Posts: 22

I don't know if this has been posted before (tried scanning though the whole thread but could have missed it):

I just installed mystuff 5.21a a couple of days ago and last night I was recording Ugly Betty when I turned the power off. I got the quick mystuff message saying it would turn off when the recording was complete.

This morning I noticed the harddrive was still running and the front panel showed it was still recording. When I checked what was still being recorded I found that Ugly Betty was being recorded and was only showing up as 100MB. I then tried to turn the toppy off, but it wouldn't power off from the remote or the front panel. I eventually had to turn it off from mains.

The only taps I have installed are the ones that come with mystuff and the display tap and is a brand new topfield with the aforementioned taps being the only ones ever installed on it.

Any advice/help would be welcome, but I'll try and reproduce the problem again tonight.

Edit: Just noticed on pg 15 of this thread a couple of people saying the same thing. Has anyone got to the bottom of this?

chunkywizard

Posted: Thu Feb 22, 2007 1:24 pm

MyStuff Team Joined: 13 May 2005 Posts: 9219 Location: Sindlesham, Berkshire Tx: Hannington

We haven't got to the bottom of this. I use this feature all the time eg. last night and have not had the problem. If it happens to you everytime then we can debug it, but not if it's intermitant. BTW, this might not be MyStuff's fault as we don't control the timers, just ask the Toppy to set them using it's normal method.

Let me know if you can narrow it down,

Cheers

CW

ubuntu

Posted: Thu Feb 22, 2007 1:38 pm

Frequent contributor Joined: 27 Dec 2005 Posts: 345 Location: High Wycombe Tx: Crystal Palace

guru wrote:

I just installed mystuff 5.21a a couple of days ago and last night I was recording Ugly Betty when I turned the power off. I got the quick mystuff message saying it would turn off when the recording was complete.

This morning I noticed the harddrive was still running and the front panel showed it was still recording. When I checked what was still being recorded I found that Ugly Betty was being recorded and was only showing up as 100MB.

This sounds very similar to the problem I reported here.

john

guru

Posted: Thu Feb 22, 2007 1:39 pm

Joined: 16 Jan 2007 Posts: 22

chunkywizard wrote:

OK thanks for that. I'll try and reproduce. I don't know if this is of any significance but I got a new toppy a few days ago as the old one started rebooting itself but I had never seen this "over running recording" in about 6 weeks of use. On the old toppy I was using mystuff 5.0 and it had the old tuners and I was running the bastille day firmware. The new toppy has newer firmware (can't remember which), the new tuners and I am running 5.21a....

BobD

Posted: Thu Feb 22, 2007 1:40 pm

MyStuff Team Joined: 03 Aug 2005 Posts: 4025 Location: Nottingham

chunkywizard wrote:

sanecyclist wrote:

Thanks BobD.

Quote:

Current (P) implemented as a start channel for EPG

Does this mean the current channel appears on the top of the grid? Any chance you could put the page-by-page view in as well?

It's a bad description by Bob, this is the page-by-page view

Alright then smartypants (thats the polite-for-forum version Smile

), what should it say? To be clear, all this option does is set the start channel (to be the channel that is at the top of the page that contains the current channel). Once the epg is displayed, it functions as per all the other epg views, ie >>/<< jump by pages, Left/Right move by one line.

chunkywizard

Posted: Thu Feb 22, 2007 2:42 pm

MyStuff Team Joined: 13 May 2005 Posts: 9219 Location: Sindlesham, Berkshire Tx: Hannington

My manual description is about half a page long Shocked

Black Cloud

Posted: Thu Feb 22, 2007 2:46 pm

Frequent contributor Joined: 18 Sep 2005 Posts: 297 Location: Brentwood Transmitter: Crystal Palace

BobD wrote:

To be clear, all this option does is set the start channel (to be the channel that is at the top of the page that contains the current channel). Once the epg is displayed, it functions as per all the other epg views, ie >>/<< jump by pages, Left/Right move by one line.

OK, you're half way there. I have three pages of favourites. I know that ITV3 is half way down page 2, so what you have done brings the EPG up correctly when I'm on ITV3. But suppose I am on C5 and want to see ITV3 in the EPG - I start using the down arrow till I go off the bottom of the page, and I am expecting to see page 2, but actually page 1 starts scrolling up instead. Please stop thinking computers and think books - eyes are the cursor and hand turns the page - it works for me 'cos I've had a lifetime of practice. Very Happy

_________________
HW: TF5800 Black Panther 1.5TB. FW: 5.13.65 Patched
SW: TAP Commander 1.32, Goldfish 0.5, Font Manager 1.0d, SecCache v0.4, EIT Sub v0.6, EPG2MEI v0.96, Extend v1.7, TF5000 Display v1.53, MyStuff 6.4, MHEG On/Off A3, WSSkiller V2.12d

BobD

Posted: Thu Feb 22, 2007 3:22 pm

MyStuff Team Joined: 03 Aug 2005 Posts: 4025 Location: Nottingham

Black Cloud wrote:

Is this how other people would see Current (P) working? Such that scrolling to the bottom of page 1 then jumps to page 2 (so the selected row jumps from being eg the 11th to being the 1st) rather than scrolling by a row (so the selected row remains the 11th).

Miss_P

Posted: Thu Feb 22, 2007 3:35 pm

Joined: 17 Oct 2006 Posts: 14

Can i just check that this is a proposed option rather than a change to the default? I much prefer things to scroll down as they do now.

Interestingly, when iguide was first launched it behaved as people are proposing here, and everyone complained that is should scroll line by line! - the exact opposite of this scenario.

All times are GMT

View next topic View previous topic Page 16 of 80 Goto page Previous 1, 2, 3 ... 15, 16, 17 ... 78, 79, 80 Next Toppy.org.uk Forum Index ~ MyStuff

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum