Author |
Message |
|
Page 1 of 1
|
eye of ra |
Posted: Thu Dec 28, 2017 6:32 pm |
|
|
Frequent contributor
Joined: 28 Dec 2005
Posts: 1018
|
I should have taken the advice to replace capacitors when I started using Toppy again.
It had been working ok so never got round to it but came back from a 2 week holiday to find it had frozen and it now just keeps rebooting or freezing after about 30 seconds. HDD spins up for 10 seconds or so then either reboots or freezes and just sits there with frozen TV picture on screen.
Checked voltages and 5V is low (4.3V) and 12V is high didn’t bother going any further and is now unplugged.
Been onto Andy’s web site but can’t see how to purchase a kit and it also says
Rebooting - U20 regulator m'board - Tab should measure 1.5V, if not, replace with LD1117DT (left side of cardslot)
Would it be a good idea to get one of these at the same time or replace caps and see how it goes? |
_________________ Toppy: 5800. Firmware: 5.13.65 Patched
AutoStart: MyStuff 5.62a | MP3 Jukebox 2.1d | WSSkiller 2.12d | Quickjump 1.69
eit2mei 7.8m3 | TapLauncher 3.7c | MHEGControl B1 | TF5000 Display 1.51
AccurateBM 0.4 | EITDupFix.
TapLauncher: MeiSearch 1.37 | Media Manager 1.5 | Tap Commander 1.32 | HDFW 2.3a.
Updated:15-05-08 |
|
Back to top |
|
YorkshireJumbo |
Posted: Thu Dec 28, 2017 7:32 pm |
|
|
Frequent contributor
Joined: 16 Sep 2005
Posts: 706
|
Best thing is to PM andyfras and see what he recommends |
_________________ YJ - You may have speed, but I have momentum
Black Panther since Sep '05, Caps replaced July '10, WD10EZRX and Turbosat adaptor added May '16
F/W: MS6 Recommended F/W 12/9/2009 -Sy+U+Uu
TAPs: MS 6.6 Suite, UK OZ Surfer |
|
Back to top |
|
andyfras |
Posted: Sat Dec 30, 2017 6:45 pm |
|
|
Frequent contributor
Joined: 25 Jul 2005
Posts: 3415
|
PM Sent |
_________________ Toppy PSU repair service or capacitor kits for DIY available - PM me for details.
MyStuff 6.6 : Little Clock : MHEGOnOff : Extend : EPG2MEI : SecCache : EIT_Sub : TSSaver : Prune EPG
Channel Organiser : Tap Commander : HDD Info : PCControl : Signal Monitor : MyInfo
URC-7555 remote: TF5800 320GB 2.5", Recommended_5800.tfd + CfPePsScUUuWfZ |
|
Back to top |
|
eye of ra |
Posted: Tue Jan 02, 2018 6:56 pm |
|
|
Frequent contributor
Joined: 28 Dec 2005
Posts: 1018
|
Thanks for the help.
PM and payment sent. |
_________________ Toppy: 5800. Firmware: 5.13.65 Patched
AutoStart: MyStuff 5.62a | MP3 Jukebox 2.1d | WSSkiller 2.12d | Quickjump 1.69
eit2mei 7.8m3 | TapLauncher 3.7c | MHEGControl B1 | TF5000 Display 1.51
AccurateBM 0.4 | EITDupFix.
TapLauncher: MeiSearch 1.37 | Media Manager 1.5 | Tap Commander 1.32 | HDFW 2.3a.
Updated:15-05-08 |
|
Back to top |
|
eye of ra |
Posted: Fri Jan 05, 2018 8:49 pm |
|
|
Frequent contributor
Joined: 28 Dec 2005
Posts: 1018
|
Received with thanks.
Hope to get it repaired over the weekend. |
_________________ Toppy: 5800. Firmware: 5.13.65 Patched
AutoStart: MyStuff 5.62a | MP3 Jukebox 2.1d | WSSkiller 2.12d | Quickjump 1.69
eit2mei 7.8m3 | TapLauncher 3.7c | MHEGControl B1 | TF5000 Display 1.51
AccurateBM 0.4 | EITDupFix.
TapLauncher: MeiSearch 1.37 | Media Manager 1.5 | Tap Commander 1.32 | HDFW 2.3a.
Updated:15-05-08 |
|
Back to top |
|
eye of ra |
Posted: Sun Jan 07, 2018 6:15 pm |
|
|
Frequent contributor
Joined: 28 Dec 2005
Posts: 1018
|
Installed the kit and sadly it made no difference it would either reboot or freeze.
Installed the no settings firmware and it stopped crashing till a scan was done then off it went again.
Reloaded no settings firmware and deleted the settings folder before doing a scan. It stopped crashing and did a verify files and folders. Great I thought its working till it finished and I found all the recordings had gone.
So months of recordings gone but at least it’s now working with a repaired PSU. |
_________________ Toppy: 5800. Firmware: 5.13.65 Patched
AutoStart: MyStuff 5.62a | MP3 Jukebox 2.1d | WSSkiller 2.12d | Quickjump 1.69
eit2mei 7.8m3 | TapLauncher 3.7c | MHEGControl B1 | TF5000 Display 1.51
AccurateBM 0.4 | EITDupFix.
TapLauncher: MeiSearch 1.37 | Media Manager 1.5 | Tap Commander 1.32 | HDFW 2.3a.
Updated:15-05-08 |
|
Back to top |
|
ccs |
Posted: Sun Jan 07, 2018 7:59 pm |
|
|
Frequent contributor
Joined: 30 Oct 2007
Posts: 2467
|
Your signature is 10 years out of date - "latest" patches and taps would help.
See mine for minimum requirements. (nb mne's a 5810.)
MyStuff installer is all you really need. |
_________________ TF5810, F/W: MS6 Recommended F/W 12/9/2009 -FmXl+CtEzIScVdZ
TAPs: EIT Sub v0.6; EPG2MEI v0.96; MPDisplayLITE V1.2; MyInfo B5.6; SecCache (UK) v0.4; Extend v1.7; MyStuff 6.6;
Sig generated by MyInfo on 20/10/14 ccsx |
|
Back to top |
|
jimi |
Posted: Mon Jan 08, 2018 10:48 am |
|
|
Regular contributor
Joined: 29 Mar 2006
Posts: 89
|
Geoff Bacon may be able to recover your files, worth dropping him a PM
http://forum.toppy.org.uk/forum/profile.php?mode=viewprofile&u=5706 |
Last edited by jimi on Mon Jan 08, 2018 11:30 pm; edited 1 time in total _________________ TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy+PeTa
TAPs: PcControl B1.4; Extend v1.7; EPG2MEI v0.96; SecCache (UK) v0.4; EIT Sub (Game) v0.6; Font Manager 1.0d; MHEG On/Off A3; (MyInfo B5.6); MyStuff 6.6; PruneEPG 1.0;
Sig generated by TopManager/PcControl on 26/01/16™ |
|
Back to top |
5800
|
eye of ra |
Posted: Mon Jan 08, 2018 8:28 pm |
|
|
Frequent contributor
Joined: 28 Dec 2005
Posts: 1018
|
I wish to thank everyone for the advice and the PMs.
To be honest the Toppy only has another 12 days as our little village now has FTTP and Virgin are coming so it will be relegated to the loft again and non of the recordings were that important. |
_________________ Toppy: 5800. Firmware: 5.13.65 Patched
AutoStart: MyStuff 5.62a | MP3 Jukebox 2.1d | WSSkiller 2.12d | Quickjump 1.69
eit2mei 7.8m3 | TapLauncher 3.7c | MHEGControl B1 | TF5000 Display 1.51
AccurateBM 0.4 | EITDupFix.
TapLauncher: MeiSearch 1.37 | Media Manager 1.5 | Tap Commander 1.32 | HDFW 2.3a.
Updated:15-05-08 |
|
Back to top |
|
underquark |
Posted: Thu Feb 01, 2018 1:35 am |
|
|
Frequent contributor
Joined: 06 Oct 2005
Posts: 1786
|
Consider donating your Toppy to Andyfras or selling it since it sounds unlikely that you'll ever use it again. Bits of it could go on to make four other Toppies life a longer, healthier life.
(Typing this as I look at my Colorado T1000e Travan tape backup that hasn't been fired up in 15 years). |
_________________ A 5800 and a 5810 still in use with various dead ones and bits lying around, one Toppy with UPS and dedicated aerial; MyStuff 6.6; QuickJump 1.72; EPG2 MEI; Various remotes - URC1056B01 (my fav.), URC11-7140 R02 (to learn new codes) programmed using tools from the excellent JP1 site. |
|
Back to top |
|
andyfras |
Posted: Thu Feb 01, 2018 10:49 am |
|
|
Frequent contributor
Joined: 25 Jul 2005
Posts: 3415
|
Thanks for the thought, but I've got about 10 Toppies in various states from fully working to inoperable, so I haven't room for any more. As there are very few repairs being requested currently, I'm considering reducing my stock of Toppies kept for spares. |
_________________ Toppy PSU repair service or capacitor kits for DIY available - PM me for details.
MyStuff 6.6 : Little Clock : MHEGOnOff : Extend : EPG2MEI : SecCache : EIT_Sub : TSSaver : Prune EPG
Channel Organiser : Tap Commander : HDD Info : PCControl : Signal Monitor : MyInfo
URC-7555 remote: TF5800 320GB 2.5", Recommended_5800.tfd + CfPePsScUUuWfZ |
|
Back to top |
|
|
|