Click here to go to the forum index Click here for the home page
 
Author Message

<  TAPs  ~  using HDDInfo TAP

Page 1 of 1
rafal1
Posted: Sun Jul 23, 2017 4:49 pm Reply with quote
Joined: 01 Mar 2014 Posts: 10
HI

Just installed and run HDDInfo TAP. I was expecting it to show me disc temperature but no temperature reading that I can see.
Could you advise what am I doing wrong?
tia
rafal
View user's profile Send private message
Geoff Bacon
Posted: Sun Jul 23, 2017 5:18 pm Reply with quote
Frequent contributor Joined: 12 Jan 2007 Posts: 3956
Press >>> to show the SMART data

Sometimes, the raw device temperature needs to be based about something other than 0. If your temperature looks funny, please post your model and the values in columns 3. 4, 5 and 6 and I'll try and work it out

Better still, run my fsCheck tap (in \ProgramFiles\Utilities) and it should show the temperature at the bottom of the log it displays on the screen.

Geoff

_________________
TopManager program
TF5800, TS On, F/W: MS6 Recommended F/W 12/9/2009 -Sy
TAPs: PcControl B1.4; StopExit v1.01; EPG2MEI v0.96; QuickJump 1.72; MyStuff 6.6; Font Manager 1.0d; Extend v1.7; SecCache (UK) v0.4; EIT Sub (Game) v0.6; MHEG On/Off A3; MyInfo B5.6; WSSkiller V2.12d; CrashTrace v0.4; fsSave 1.1; PruneEPG 1.0;
Sig generated by MyInfo on 17/1/16
View user's profile Send private message Visit poster's website
rafal1
Posted: Sun Jul 23, 2017 6:07 pm Reply with quote
Joined: 01 Mar 2014 Posts: 10
Thank you Geoff

pressing >>> on HDDInfo doesn't move it on Smart Data on my toppy unfortunately.
I just downloaded and run your fsCheck tap, fantastic, all readings I wanted are there.
Thanks a lot
Rafal
View user's profile Send private message
andyfras
Posted: Sun Jul 23, 2017 7:25 pm Reply with quote
Frequent contributor Joined: 25 Jul 2005 Posts: 3391
Geoff meant the (>>) button to get to the second HDDInfo screen.

_________________
Toppy PSU repair service or capacitor kits for DIY available - PM me for details.
MyStuff 6.6 : Little Clock : MHEGOnOff : Extend : EPG2MEI : SecCache : EIT_Sub : TSSaver : Prune EPG
Channel Organiser : Tap Commander : HDD Info : PCControl : Signal Monitor : MyInfo
URC-7555 remote: TF5800 320GB 2.5", Recommended_5800.tfd + CfPePsScUUuWfZ
View user's profile Send private message Visit poster's website
rafal1
Posted: Sun Jul 23, 2017 8:16 pm Reply with quote
Joined: 01 Mar 2014 Posts: 10
Hi Andy
yes of course it is the (>>) button but pressing it doesn't do anything when HDDInfo is on the screen. The button itself works perfectly in other situations
thanks
View user's profile Send private message
MikB
Posted: Sat Jul 29, 2017 9:57 am Reply with quote
Frequent contributor Joined: 23 Sep 2006 Posts: 282 Location: West Midlands
Odd. When you are in HDDINFO, on the first page, do you see :-

Code:
Smart
Supported: YES
Enabled [3]: YES
Attr. AutoSave [4]: ON
Status: Tests passed


?

You may need to press [3] or [4] (number pad) to get it to look like above -- although on mine if I disable SMART and press [>>] (not [>]) -- I still get a 2nd screen with "SMART Disabled".

So not sure why you can't get to the 2nd screen.

_________________
Toppy Taps: http://toppy.signal11.org.uk

TF5800, IA On, TS On, F/W: 5.13.65T 14/4/2009 -AbCkEeEfEpHeKtRaRhRsSdStSyTeTfTpTsVr+Pf
TAPs: DescriptionExtender 2.1; MeiSearch 1.30; EPG Clean V1.01 Dev Version; EPGnavigator v5.1c; MyInfo B5.6;
Sig generated by MyInfo on 17/1/15
View user's profile Send private message Visit poster's website
rafal1
Posted: Sat Jul 29, 2017 2:33 pm Reply with quote
Joined: 01 Mar 2014 Posts: 10
Hi

Sorry I should have post it earlier. I made a mistake by putting the tap in to the "auto start" folder. This caused it getting stuck on the "first page". When I moved the tap in to "program files" folder it worked fine and I can skip on "smart data" page
thanks again
View user's profile Send private message
MikB
Posted: Sat Aug 05, 2017 10:18 am Reply with quote
Frequent contributor Joined: 23 Sep 2006 Posts: 282 Location: West Midlands
Glad you sorted it, didn't realise that HDDInfo reacted that way if auto-started Smile

Some TAPS are not really meant for auto-starting anyway!

_________________
Toppy Taps: http://toppy.signal11.org.uk

TF5800, IA On, TS On, F/W: 5.13.65T 14/4/2009 -AbCkEeEfEpHeKtRaRhRsSdStSyTeTfTpTsVr+Pf
TAPs: DescriptionExtender 2.1; MeiSearch 1.30; EPG Clean V1.01 Dev Version; EPGnavigator v5.1c; MyInfo B5.6;
Sig generated by MyInfo on 17/1/15
View user's profile Send private message Visit poster's website

Display posts from previous:  

All times are GMT + 1 Hour
Page 1 of 1

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum