Toppy.org.uk ~ View topic - E 13 on start up

Author

Message

< New users start here ~ E 13 on start up

Page 1 of 1

Posted: Mon Oct 24, 2005 11:01 am

Joined: 21 Oct 2005 Posts: 8

When I start the Toppy up in the morning I often get a (very large) E 13 displaying up on the screen. I can get rid of it by turning it off and then turning it back on again - but woud rather have a more permanent solution if poss.

I have the Spet firmware (as installed by the retailer) with no TAPS for now.

Is there a list of the error codes anywhere?

Thanks for any info.

Rich

Posted: Mon Oct 24, 2005 4:11 pm

Frequent contributor Joined: 12 Apr 2005 Posts: 515

Ive only had that when a fimrware update hasnt worked (different E number) you would be better off downloading the latest firmware and installing that to your toppy.

AllanG

Posted: Mon Oct 24, 2005 5:24 pm

Frequent contributor Joined: 15 May 2005 Posts: 455 Location: Glasgow, Scotland

JT wrote:

Is there a list of the error codes anywhere?

According to the German Topfield forum...

------------

ot## OTA downloading in progress. ## means the number of remained data block.

dn## Downloading via UART in progress.

AP## Writing the firmware to Flash memory.

Fd## Writing the channel data to Flash memory.

Ed## Writing the EEPROM data.

E-01 Data error in downloaded data via UART (corrunpted data)

E-02 Corrupted firmware in Flash memory

E-03 Communication error with UART

E-04 Error in writing Flash memory

E-05 Too big downloaded data for the Flash memory

E-06 Error in system ID. Not compatible firmware with the receiver.

E-07 Error in system ID. Not compatible firmware with the receiver.

E-08 Error in downloaded data format

E-09 Error in reading EEPROM

E-10 Error in writing EEPROM

E-11 Unsupported Flash memory

E-13 Timeout error in OTA

E-14 Data error in downloaded data via OTA (corrunpted data)

End Downloading finished successfuly

------------

E-13 seems to indicate that an Over-The-Air update is timing out!

_________________
Allan Girvan
TF5800, IA On, TS On, F/W: MS6 Recommended F/W 2/6/2009 -AbBfBqCkCpEcEeEfEpErEsKtPcRaRpSdSlSrStSyTeTfXl+FmPsUUu
TAPs: mei2archive BETA 3.8l3; toppypal v3.4; FastSkip 1.1; mei2eit BETA 2.5; EPG Uploader 3.15rls2; MyStuff 6.0; Font Manager 1.0d; Extend v1.7; MyInfo B4.0;
Sig generated by MyInfo on 21/9/09

DB1

Posted: Tue Oct 25, 2005 7:44 am

Frequent contributor Joined: 30 Mar 2005 Posts: 620 Location: Orpington

The wife always says E numbers are bad for you Smile

Richard46

Posted: Tue Oct 25, 2005 10:08 am

Frequent contributor Joined: 31 Mar 2005 Posts: 1586 Location: Forest Gate East London

I think (not sure) that I got an E 13 when I was loading a new firmware version once. Whatever it was James at Turbosat sorted it in a few minutes. Smile

Unfortunately I have no idea what he did. Confused

Richard

All times are GMT

View next topic View previous topic Page 1 of 1 Toppy.org.uk Forum Index ~ New users start here

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum